Products
-
Taisin Metal 3D printer ISLM800QN
-
Taisin Light-adoptive 3D printer SLA880
-
Taisin horizontal processing center YBM-1270
-
Taisin Metal 3D printer ISLM500D
-
Taisin Metal 3D printer IDEN160
-
Taisin Light-adoptive 3D printer SLA1900D
-
Taisin Metal 3D printer ISLM420DN
-
Taisin Light-adoptive 3D printer SLA550
-
Taisin Light-adopted 3D printer SLA660
-
Taisin Light-adoptive 3D printer SLA550Lite
-
Taisin Light-adoptive 3D printer SLA450
-
Taisin Metal 3D printer SLM160
-
Taisin Vertical CNC TXLC-500 CNC
-
Taisin high-speed five-axis processing center TX-UC400
-
Taisin Metal 3D printer ISLM350D
-
Taisin portal processing center with CNC TXM-9038
Taisin Metal 3D printer ISLM350DN
Selective laser melting of metals (SLM)-This is a 3D printing technology in which metal powder is used for direct printing of metal parts. When printing, the scraper applies a layer of metal powder to the supporting plate of the molding cylinder, and the laser beam selectively melts the powder in accordance with the transverse section profile of each layer of the part for processing the current layer. After the sintering of one layer is completed, the lifting system reduces the height of one layer of cross section. The video for the distribution of the powder distributes another layer of metal powder into the formed layer of cross section and sins the next layer. This is the layer by the layer. Until the whole part is in a way. The entire molding process is carried out in a technological chamber, vacuumed or filled with protective gas to prevent metal reaction with other gases at high temperatures.
Description
marker
Selective laser melting of metals (SLM)-This is a 3D printing technology in which metal powder is used for direct printing of metal parts. When printing, the scraper applies a layer of metal powder to the supporting plate of the molding cylinder, and the laser beam selectively melts the powder in accordance with the transverse section profile of each layer of the part for processing the current layer. After the sintering of one layer is completed, the lifting system reduces the height of one layer of cross section. The video for the distribution of the powder distributes another layer of metal powder into the formed layer of cross section and sins the next layer. This is the layer by the layer. Until the whole part is in a way. The entire molding process is carried out in a technological chamber, vacuumed or filled with protective gas to prevent metal reaction with other gases at high temperatures.
In technologyThe selective laser melting of metals TAIXING Technology uses a laser with a high energy density and a small diameter of the spot, which can complete the manufacture of complex parts, for the manufacture of which ordinary methods would require weeks or even months, over an extremely short period of time. Formed parts not only have accurate dimensional accuracy, high strength and high mass density, but also have excellent mechanical properties and other aspects. It is mainly used for the rapid manufacture of high -precision and high -quality metal parts.
Key features
High speed, high accuracy, high quality
Metal 3D printer TAIXING · SLM series
Formed parts have the best surface quality without polishing.
Cast parts have high accuracy and are used for the manufacture of precision prototypes.
The direct production of metal functional parts without intermediate processes, which greatly simplifies the production process.
It has a metallurgical structure, high density (> 99%), excellent mechanical properties and allows you to exclude the need for subsequent processing.
Details can be made in a matter of minutes or hours, depending on the size and complexity of the part.
It can directly produce functional parts of a complex geometric shape (for example, latches, living loops)
The material has a wide range of application, and its metal powder can be various individual materials or multicomponent materials.
Especially suitable for the manufacture of individual or small -scale functional parts for an individual order.
Technical characteristics of ISLM350DN
| Laser system Laser system | Laser laser type × 2 Wavelength 1064 nm Laser power 500 W × 2 (one laser optional) |
| re -coating system Re -coating system | The coating method: the scraper distributes the powder in two directions. Powder supply mode: the powder falling system and the powder circuit circulation system automatically serve the powder. The thickness of the normal layer is 0.05 mm. Quickly produce a layer with a thickness of 0.05 ~ 0.15 mm. The thickness of the precision production layer is 0.02 ~ 0.05 mm. |
| Optical scan system Optical and scanning | Light spot (diameter @ 1/e²) 0.06 ~ 0.20 mm Scanning galvanometer high -speed scanning galvanometer × 2 Part scan speed 1.0–4.0 m/s (recommended) Partial jump speed ≥10.0 m/s. The reference production speed is 15 ~ 50 cm³/h. |
| Protection system Shield system | Protective gas nitrogen, argon (active metal materials must be protected by argon) Stream regulator: intellectual adjustment 0-5 l/min. Dusting control and an effective protective gas circulation system |
| Make a vat Construction VAT | The standard volume is about 63 liters. Production platform XY 350 mm (x) × 350 mm (y) (excluding rounding holes for screws, etc.) A axis Z 500 mm (including the thickness of the substrate) The maximum weight of the part is 150 kg. Type of heating: precision heating of resistive wire Molding materials: stainless steel, molding steel, titanium alloy, aluminum alloy, cobalt chromium alloy, nickel alloy, copper, etc. |
| Management software SOFTWARE | Type of Ethernet, TCP/IP, IEEE802.3 ISLM (Presto SLM) production software 3Dlayer data processing software (multi -level processing software with three -dimensional support) CLI data interface file, SLC file, STL file |
| Installation conditions Installation conditions | Power supply 380V (± 10%) of alternating current 50/60Hz, three -phase, 25a Environmental temperature 20-26 ° C Relative humidity is below 40%, without frost. Equipment size 2.56 m (w) × 1.43 m (d) × 2.80 m (c) Equipment weight is about 3000 kg. |
| Warranty period GUARANTEE | Laser 5000 hours or 12 months (depending on what will come earlier) The life of the entire machine is 12 months from the date of installation. |
Contact us
Related popular products
Taisin high-precision vertical processing center with CNC VMC TXP-1890
The machines of a series of vertical processing centers are based on quick and rigid processing as a basic starting point of design, ensuring mass production, processing accuracy and the efficiency of parts processing. The modular combination of functions of highly effective unloading, fast feed and high -speed spindle can satisfy the individual choice of various needs of customers in processing; All key components affecting the quality of the entire machine are imported high -quality components;
Taisin Metal 3D printer IDEN160
Selective laser melting of metals (SLM) is a 3D printing technology in which metal powder is used for direct printing of metal parts. When printing, the scraper applies a layer of metal powder to the supporting plate of the molding cylinder, and the laser beam selectively melts the powder in accordance with the transverse section profile of each layer of the part for processing the current layer. After the sintering of one layer is completed, the lifting system reduces the height of one layer of cross section. The video for the distribution of the powder distributes another layer of metal powder into the formed layer of cross section and sins the next layer. This is the layer by the layer. Until the whole part is in a way. The entire molding process is carried out in a technological chamber, vacuumed or filled with protective gas to prevent metal reaction with other gases at high temperatures.
Taisin Gravity-milling machine EMC-650
The gravity-milling machine is a CNC equipment that combines the functions of engraving and milling. It is specially designed for high -precision processing of small parts. It has a high-speed spindle and a high stiffness body, capable of performing accurate processing of complex contours, suitable for processing various metal and non-metallic materials, such as steel, aluminum alloy, copper, plastic, etc. Gravity and milling machines are widely used in the manufacture of press forms, prezizy processing of details, advertising prizes and bushes Production due to their high speed, high accuracy and good surface quality. It is characterized by high processing accuracy, high speed and a wide processing range. It is especially suitable for scenes requiring thin engraving and light milling.
Taisin Light-adoptive 3D printer SLA1900D
Stereolithography (SLA) is a high-speed and high-precision 3D printing technology. Details are printed using a UV laser and a liquid photopolymer, cured by UV radiation-“photopolymer”. The laser beam is controlled to scan the surface of the liquid resin, so that the surface of the liquid resin hardens, forming the scanned film of the cross section of the part. After curing one layer, cover the newly formed layer with another layer of liquid resin and continue scanning to harden and combine it with the cross section of the previously rejected part. This happens forward and backward, a layer by a layer to print a full three -dimensional part.
Taisin Metal 3D printer SLM160
Selective laser melting of metals (SLM) is a 3D printing technology in which metal powder is used for direct printing of metal parts. When printing, the scraper applies a layer of metal powder to the supporting plate of the molding cylinder, and the laser beam selectively melts the powder in accordance with the transverse section profile of each layer of the part for processing the current layer. After the sintering of one layer is completed, the lifting system reduces the height of one layer of cross section. The video for the distribution of the powder distributes another layer of metal powder into the formed layer of cross section and sins the next layer. This is the layer by the layer. Until the whole part is in a way. The entire molding process is carried out in a technological chamber, vacuumed or filled with protective gas to prevent metal reaction with other gases at high temperatures.
Taisin Light-adoptive 3D printer SLA880
Stereolithography (SLA) is a high-speed and high-precision 3D printing technology. Details are printed using a UV laser and a liquid photopolymer, cured by UV radiation-“photopolymer”. The laser beam is controlled to scan the surface of the liquid resin, so that the surface of the liquid resin hardens, forming the scanned film of the cross section of the part. After curing one layer, cover the newly formed layer with another layer of liquid resin and continue scanning to harden and combine it with the cross section of the previously rejected part. This happens forward and backward, a layer by a layer to print a full three -dimensional part.
Taisin three-wire rail molding machine of high stiffness TX-6027
A three-line reforming machine of high stiffness is a high-performance machine specially designed for processing press forms and has excellent rigidity and stability. This model uses a three -line design of the guide, which significantly increases the vibration resistance and carrying capacity of the machine, providing stable and accurate cutting performance during high -precision processing. Especially suitable for processing large, complex shapes and materials of high hardness. Due to the excellent accuracy and stability of processing, it is widely used in the production of press forms in cars, household appliances, plastics, pressure under pressure and other industries. It can effectively reduce processing time and increase production efficiency and product quality.
Taisin Metal 3D printer SLM280
Selective laser melting of metals (SLM) is a 3D printing technology in which metal powder is used for direct printing of metal parts. When printing, the scraper applies a layer of metal powder to the supporting plate of the molding cylinder, and the laser beam selectively melts the powder in accordance with the transverse section profile of each layer of the part for processing the current layer. After the sintering of one layer is completed, the lifting system reduces the height of one layer of cross section. The video for the distribution of the powder distributes another layer of metal powder into the formed layer of cross section and sins the next layer. This is the layer by the layer. Until the whole part is in a way. The entire molding process is carried out in a technological chamber, vacuumed or filled with protective gas to prevent metal reaction with other gases at high temperatures.
Taisin Light-adopted 3D printer SLA660
Stereolithography (SLA) is a high-speed and high-precision 3D printing technology. Details are printed using a UV laser and a liquid photopolymer, cured by UV radiation-“photopolymer”. The laser beam is controlled to scan the surface of the liquid resin, so that the surface of the liquid resin hardens, forming the scanned film of the cross section of the part. After curing one layer, cover the newly formed layer with another layer of liquid resin and continue scanning to harden and combine it with the cross section of the previously rejected part. This happens forward and backward, a layer by a layer to print a full three -dimensional part.
Taisin Metal 3D printer ISLM420DN
Selective laser melting of metals (SLM) is a 3D printing technology in which metal powder is used for direct printing of metal parts. When printing, the scraper applies a layer of metal powder to the supporting plate of the molding cylinder, and the laser beam selectively melts the powder in accordance with the transverse section profile of each layer of the part for processing the current layer. After the sintering of one layer is completed, the lifting system reduces the height of one layer of cross section. The video for the distribution of the powder distributes another layer of metal powder into the formed layer of cross section and sins the next layer. This is the layer by the layer. Until the whole part is in a way. The entire molding process is carried out in a technological chamber, vacuumed or filled with protective gas to prevent metal reaction with other gases at high temperatures.
Taisin Light-adopted 3D printer SLA1300D
Stereolithography (SLA) is a high-speed and high-precision 3D printing technology. Details are printed using a UV laser and a liquid photopolymer, cured by UV radiation-“photopolymer”. The laser beam is controlled to scan the surface of the liquid resin, so that the surface of the liquid resin hardens, forming the scanned film of the cross section of the part. After curing one layer, cover the newly formed layer with another layer of liquid resin and continue scanning to harden and combine it with the cross section of the previously rejected part. This happens forward and backward, a layer by a layer to print a full three -dimensional part.
Taisin Light-adoptive 3D printer SLA300
Stereolithography (SLA) is a high-speed and high-precision 3D printing technology. Details are printed using a UV laser and a liquid photopolymer, cured by UV radiation-“photopolymer”. The laser beam is controlled to scan the surface of the liquid resin, so that the surface of the liquid resin hardens, forming the scanned film of the cross section of the part. After curing one layer, cover the newly formed layer with another layer of liquid resin and continue scanning to harden and combine it with the cross section of the previously rejected part. This happens forward and backward, a layer by a layer to print a full three -dimensional part.
Taisin high-speed five-axis processing center TX-UC400
A high -speed Pyato -axis processing center is a modern CNC machine, which can simultaneously control the movement of several axes when rotating at high speed and is suitable for processing complex curved surfaces and high -precision parts. It is widely used in aerospace, automotive industry, processing of press forms, precision instrumentation and other industries. It can perform multifaceted processing in one clamp, reduce numerous errors of preparation of workpieces, as well as increase production efficiency and processing accuracy. This equipment has powerful flexible processing capabilities and is especially suitable for processing complex three -dimensional curved surfaces and high -precision parts, which significantly increases production automation and product quality.
Taisin processing center for drilling and cutting threads TXT-800
A series of processing centers for drilling and cutting threads is widely used for rapid drilling, cutting threads and milling small parts, such as electronics, plumbing, cars, parts and medical equipment; They are also suitable for small forms and precision processing of copper;
Taisin portal processing center YBM-2015
The portal processing center is a large -sized high -performance CNC processing equipment specially designed for precision processing of large and complex blanks. Its design uses a portal frame, which has high stiffness and stability, provides a multi -axial connection, has a wide processing range and is suitable for cutting various complex contours. The equipment is equipped with a powerful spindle and a high -precision guide system, which meet the requirements of high -speed and high -precision processing. Portal processing centers are widely used in aerospace, shipbuilding, energy, heavy engineering, the production of press forms and other industries. They are especially suitable for processing large parts, complex curved surfaces and high -precision shapes.
Taisin Light-adoptive 3D printer SLA1600D
Stereolithography (SLA) is a high-speed and high-precision 3D printing technology. Details are printed using a UV laser and a liquid photopolymer, cured by UV radiation-“photopolymer”. The laser beam is controlled to scan the surface of the liquid resin, so that the surface of the liquid resin hardens, forming the scanned film of the cross section of the part. After curing one layer, cover the newly formed layer with another layer of liquid resin and continue scanning to harden and combine it with the cross section of the previously rejected part. This happens forward and backward, a layer by a layer to print a full three -dimensional part.
Please leave us a message
- Russian
- English
- French
- German
- Portuguese
- Spanish
- Japanese
- Korean
- Arabic
- Turkish
- Italian
- Indonesian
- Swedish
- Belarusian
- Bengali
- Telugu
- Ukrainian
- Uzbek
- Vietnamese