Products
-
Taisin Metal 3D printer ISLM800QN
-
Taisin portal processing center with CNC TXM-9038
-
Taisin Light-adoptive 3D printer SLA500
-
Taisin portal processing center YBM-2015
-
Taisin Light-adoptive 3D printer SLA1900D
-
Taisin Light-adoptive 3D printer SLA300
-
Taisin Light-adoptive 3D printer SLA1600D
-
Taisin Gravity-milling machine EMC-650
-
Taisin three-wire rail molding machine of high stiffness TX-6027
-
Taisin high-precision vertical processing center with CNC VMC TXP-1890
-
Taisin horizontal processing center with CNC High accuracy HMC TXHD-630
-
Taisin Light-adoptive 3D printer SLA450
-
Taisin Metal 3D printer SLM160
-
Taisin Pyatioseva CNC processing center for machining TXMT-21042
-
Taisin Light-adopted 3D printer SLA660
-
Taisin high-speed and high-precision processing center for processing parts TX-V8
Taisin drilling and threaded-cutting machine with CNC TXT-700
The centers for drilling and cutting threads are designed to be simple and effective, ideally suitable for accurate, quick and repeated processing processes. A special design for drilling and cutting threads provides maximum efficiency and cutting speed of thread, and also allows you to drill more solid materials. Drilling-rhinated CNC machines are ideal for processing parts with several holes, deep holes or threaded holes.
Description
marker
Introduction of the product
The centers for drilling and cutting threads are designed to be simple and effective, ideally suitable for accurate, quick and repeated processing processes. A special design for drilling and cutting threads provides maximum efficiency and cutting speed of thread, and also allows you to drill more solid materials. Drilling-rhinated CNC machines are ideal for processing parts with several holes, deep holes or threaded holes.
Details about the product
The centers for drilling and cutting threads are designed to be simple and effective, ideally suitable for accurate, quick and repeated processing processes. A special design for drilling and cutting threads provides maximum efficiency and cutting speed of thread, and also allows you to drill more solid materials. Drilling-rhinated CNC machines are ideal for processing parts with several holes, deep holes or threaded holes. Get a line of high-speed and high-performance threaded centers, as well as drilling-rhinated centers. The machines of this series offer higher feed speeds and a faster shift of the tool than competitors in this class.
The bed is cast with high accuracy from high -quality cast iron HT300.
The speed of the spindle BT30 20,000 rpm, engine power 5.5 kW.
It is equipped with a tool for changing the 21t servo drive, the tool for changing the tool is 1.8 s.
The rapid displacement reaches 60/60/48, and the rate of hard cutting of the thread is 6000 rpm.
①. Evid axis z
The effective stroke of the Z axis is 410 mm, and the distance between the bow of the spindle and the working surface is 150-560 mm. Four axes can be installed without additional gaskets and do not affect the rigidity of the machine.
②. Bolshoy table
Line size: 1000x450mm. Large workbag can process larger parts.
Optical scale
Additional lines of the optical grilles of Heidenhain and Fagor with an accuracy of less than ± 5 microns.
③. Stable foundation.
The total base V8, span 1020 mm, high rigidity, high -precision bed.
④. Minor engine
The standard high -speed BT30 engine at a speed of 20,000 rpm has a power of 5.5 kW; An additional engine with a high torque of 12,000 rpm has a power of 7.5 kW.
Fast change of tools
It is equipped with a server tool with a capacity of 21 tooths. The time of the tool change is 1.8 s; The speed of fast movement along the X/Y axes is 60 m/min, and the speed of fast movement along the Z axis is 48 m/min.
Powerful spindle
The YSV800 is equipped with a BBT40 with an external diameter of 150 mm with high rigidity, a spindle with a short bow, five bearings and a nozzle for the supply of coolant.
Configuration update
German linear line guide Rexroth, Taiwanese Servo tools, Taiwanese Spindle.
Beautiful appearance
Design of sheet metal in the European and American style, beautiful and practical.
The main technical parameters
| Model | YST-700 | ||
| Topic | Specification | unit | |
| travel
| Axis x/y/z | mm | 700/450/410 |
| Spindle's nose to layout | mm | 150-560 | |
| Spindle center to the column | mm | No. 4955 | |
| Trequic guide | Ball linear guide | ||
| Work sheet
| Line size (length and width) | mm | 900x450 |
| Maximum load on the workbench | kg | 350 | |
| T-shaped groove | mm | 3-14x125 | |
| Spindle
| Spindle cone | type | BT-30 |
| Spindle speed | Speed | 20,000 | |
| Spindle zone | Right in DS | ||
| The speed of feed
| Fast movement (xy/z | m/min | 60/60/48 |
| Cutting speed (y/z) | m/min | 10 | |
| Tool change device
| Automatic tool change | Quick wheel | |
| Type of tool holder | type | BT-30 | |
| The volume of customer storage customers | piece | twenty one | |
| maximum. Tool diameter (near) | mm | 60 | |
| maximum. Tool diameter (empty) | mm | 80 | |
| maximum. The length of the tool | mm | 200 | |
| maximum. The weight of the tool | kg | 3.5 | |
| Tool change time | Second | 1.8 | |
| engine
| Spindle engine | kW | 5.5 |
| Three -axis servomotor | kW | 1.5/1.5/3.0 | |
| accuracy
| accuracy | mm | ± 0.005 |
| Repeatability | mm | ± 0.003 | |
| The required power source
| Requirements for electrical equipment | Qian Fuan | 15 |
| Air pressure requirements | kg/cm² | 648 | |
| Other | Dimensional dimensions (length*width*height) | mm | 2200x2850x2750 |
| gross weight | T | 4.5 | |
Technical characteristics IDEN160
Laser system
Laser system type laser Voloconium laser
Wavelength 1064 nm
Laser power 500 W
re -coating system
The re -coating system system for applying the coating: the scraper distributes the powder in two directions.
The thickness of the normal layer is 0.03 mm.
Fast the thickness of the layer 0.03 ~ 0.10 mm.
The thickness of the precision production layer is 0.02 ~ 0.03 mm.
Optical scan system
Optical and scanning stain (diameter @ 1/e²) 0.05 ~ 0.15 mm
Scanning galvanometer Scanlab
Part scan speed 2.0 m/s (recommended)
Partial jump speed 10.0 m/s (recommended)
Estimated speed of production: 1200 dental crowns/24 hours, 75 dental braces/24 hours.
Protection system
Shield system gas protection nitrogen, argon (active metal materials must be protected by argon)
Stream regulator: intellectual adjustment 0-3 l/min.
Dusting control and an effective protective gas circulation system
Dust removal fourth level of removal and dust cleaning
Make a vat
The standard volume of VAT is about 5 liters.
Production platform XY 160 mm (x) × 160 mm (Y) (excluding fillets, etc.)
A axis Z 200 mm (including the thickness of the substrate)
The maximum weight of the part is 10 kg.
Fast replacement of the substrate assembly and disassembly without holes for the screws and fast replacement of the transition compartment
Precise Servigator of the drive engine
Type of heating: precision heating of resistance wires
Molding materials: pure titanium, titanium alloy, cobalt chromium alloy, etc.
Management software
Ethernet, TCP/IP, IEEE802.3 network software software
ISLM 4.0 control software, special software for dental production
3Dlayer data processing software (multi -level processing software with three -dimensional support)
Data CLI file, SLC file, STL file
Installation conditions
Equipment conditions of power supply 220 V (± 10 %) alternating current, 50/60 Hz, single -phase, 16 A.
Environmental temperature 20-26 ° C
Relative humidity is below 40%, without frost.
Equipment size is 1.10 m (w) × 1.30 m (g) × 1.85 m (c)
Equipment weight is about 1000 kg.
Warranty period
A guarantee for a laser 5000 hours or 12 months (depending on what will come earlier)
The life of the entire machine is 12 months from the date of installation.
Contact us
Related popular products
Taisin Metal 3D printer SLM280
Selective laser melting of metals (SLM) is a 3D printing technology in which metal powder is used for direct printing of metal parts. When printing, the scraper applies a layer of metal powder to the supporting plate of the molding cylinder, and the laser beam selectively melts the powder in accordance with the transverse section profile of each layer of the part for processing the current layer. After the sintering of one layer is completed, the lifting system reduces the height of one layer of cross section. The video for the distribution of the powder distributes another layer of metal powder into the formed layer of cross section and sins the next layer. This is the layer by the layer. Until the whole part is in a way. The entire molding process is carried out in a technological chamber, vacuumed or filled with protective gas to prevent metal reaction with other gases at high temperatures.
Taisin horizontal processing center YBM-1270
The horizontal processing center is a high -performance and high -precision CNC machine with a horizontal spindle arrangement, suitable for processing complex parts and serial production. The machine is equipped with a multi -axial connection function and an automatic tool for changing the tool, which allows the processing of several surfaces and complex curved surfaces in one clamp, reducing the amount of clamp time and processing errors. Horizontal processing centers are usually used to efficiently process heavy blanks and have a good performance of chips removal. They are suitable for aerospace, automotive industry, mechanical engineering, large forms and other areas. Due to the high rigidity, excellent processing stability and the effective processing opportunities, it is widely used in industries, where high performance and accuracy are required.
Taisin high-speed five-axis processing center TX-UC400
A high -speed Pyato -axis processing center is a modern CNC machine, which can simultaneously control the movement of several axes when rotating at high speed and is suitable for processing complex curved surfaces and high -precision parts. It is widely used in aerospace, automotive industry, processing of press forms, precision instrumentation and other industries. It can perform multifaceted processing in one clamp, reduce numerous errors of preparation of workpieces, as well as increase production efficiency and processing accuracy. This equipment has powerful flexible processing capabilities and is especially suitable for processing complex three -dimensional curved surfaces and high -precision parts, which significantly increases production automation and product quality.
Taisin Light-adopted 3D printer ISL1100
Stereolithography (SLA) is a high-speed and high-precision 3D printing technology. Details are printed using a UV laser and a liquid photopolymer, cured by UV radiation-“photopolymer”. The laser beam is controlled to scan the surface of the liquid resin, so that the surface of the liquid resin hardens, forming the scanned film of the cross section of the part. After curing one layer, cover the newly formed layer with another layer of liquid resin and continue scanning to harden and combine it with the cross section of the previously rejected part. This happens forward and backward, a layer by a layer to print a full three -dimensional part.
Taisin Metal 3D printer ISLM600QN
Selective laser melting of metals (SLM) is a 3D printing technology in which metal powder is used for direct printing of metal parts. When printing, the scraper applies a layer of metal powder to the supporting plate of the forming cylinder, and the laser beam selectively melts the powder in accordance with the transverse section of each layer of the part for processing the current layer. After the sintering of one layer is completed, the lifting system reduces the height of one layer of cross section. The video for the distribution of the powder distributes another layer of metal powder into the formed layer of cross section and sins the next layer. This is the layer by the layer. Until the whole part is in a way. The entire molding process is carried out in a technological chamber, vacuumed or filled with protective gas to prevent metal reaction with other gases at high temperatures.
Taisin Light-adopted 3D printer SLA1300D
Stereolithography (SLA) is a high-speed and high-precision 3D printing technology. Details are printed using a UV laser and a liquid photopolymer, cured by UV radiation-“photopolymer”. The laser beam is controlled to scan the surface of the liquid resin, so that the surface of the liquid resin hardens, forming the scanned film of the cross section of the part. After curing one layer, cover the newly formed layer with another layer of liquid resin and continue scanning to harden and combine it with the cross section of the previously rejected part. This happens forward and backward, a layer by a layer to print a full three -dimensional part.
Taisin Light-adoptive 3D printer SLA550Lite
Stereolithography (SLA) is a high-speed and high-precision 3D printing technology. Details are printed using a UV laser and a liquid photopolymer, cured by UV radiation-“photopolymer”. The laser beam is controlled to scan the surface of the liquid resin, so that the surface of the liquid resin hardens, forming the scanned film of the cross section of the part. After curing one layer, cover the newly formed layer with another layer of liquid resin and continue scanning to harden and combine it with the cross section of the previously rejected part. This happens forward and backward, a layer by a layer to print a full three -dimensional part.
Taisin Light-adopted 3D printer SLA6036
Stereolithography (SLA) is a high-speed and high-precision 3D printing technology. Details are printed using a UV laser and a liquid photopolymer, cured by UV radiation-“photopolymer”. The laser beam is controlled to scan the surface of the liquid resin, so that the surface of the liquid resin hardens, forming the scanned film of the cross section of the part. After curing one layer, cover the newly formed layer with another layer of liquid resin and continue scanning to harden and combine it with the cross section of the previously rejected part. This happens forward and backward, a layer by a layer to print a full three -dimensional part.
Taisin Metal 3D printer ISLM420DN
Selective laser melting of metals (SLM) is a 3D printing technology in which metal powder is used for direct printing of metal parts. When printing, the scraper applies a layer of metal powder to the supporting plate of the molding cylinder, and the laser beam selectively melts the powder in accordance with the transverse section profile of each layer of the part for processing the current layer. After the sintering of one layer is completed, the lifting system reduces the height of one layer of cross section. The video for the distribution of the powder distributes another layer of metal powder into the formed layer of cross section and sins the next layer. This is the layer by the layer. Until the whole part is in a way. The entire molding process is carried out in a technological chamber, vacuumed or filled with protective gas to prevent metal reaction with other gases at high temperatures.
Taisin Light-adoptive 3D printer SLA1600D
Stereolithography (SLA) is a high-speed and high-precision 3D printing technology. Details are printed using a UV laser and a liquid photopolymer, cured by UV radiation-“photopolymer”. The laser beam is controlled to scan the surface of the liquid resin, so that the surface of the liquid resin hardens, forming the scanned film of the cross section of the part. After curing one layer, cover the newly formed layer with another layer of liquid resin and continue scanning to harden and combine it with the cross section of the previously rejected part. This happens forward and backward, a layer by a layer to print a full three -dimensional part.
Taisin Pyatioseva CNC processing center for machining TXMT-21042
A five -axis machine is a modern CNC processing equipment with five independently moving axes that can be accurately controlled in directions X, Y, Z, A and B to achieve effective and high -precision processing of complex parts. The machine adds two rotation axes (usually axis A and axis B), which allows the tool to approach the workpiece at any angle, which significantly increases the flexibility and efficiency of processing. The main advantages of five -axle machines: high efficiency, high accuracy, an increased service life, suitable for complex parts.
Taisin Light-adopted 3D printer SLA660Lite
Stereolithography (SLA) is a high-speed and high-precision 3D printing technology. Details are printed using a UV laser and a liquid photopolymer, cured by UV radiation-“photopolymer”. The laser beam is controlled to scan the surface of the liquid resin, so that the surface of the liquid resin hardens, forming the scanned film of the cross section of the part. After curing one layer, cover the newly formed layer with another layer of liquid resin and continue scanning to harden and combine it with the cross section of the previously rejected part. This happens forward and backward, a layer by a layer to print a full three -dimensional part.
Taisin Gravity-milling machine EMC-650
The gravity-milling machine is a CNC equipment that combines the functions of engraving and milling. It is specially designed for high -precision processing of small parts. It has a high-speed spindle and a high stiffness body, capable of performing accurate processing of complex contours, suitable for processing various metal and non-metallic materials, such as steel, aluminum alloy, copper, plastic, etc. Gravity and milling machines are widely used in the manufacture of press forms, prezizy processing of details, advertising prizes and bushes Production due to their high speed, high accuracy and good surface quality. It is characterized by high processing accuracy, high speed and a wide processing range. It is especially suitable for scenes requiring thin engraving and light milling.
Taisin Vertical CNC TXLC-500 CNC
A vertically tokure machine (WTL) is one of the most traditional types of machine tools. They are ideal for heavy processing of medium and large parts. As technology develops, vertical turning machines become more universal. Our vertical turning machines increase performance due to stable processing of thin -walled blanks and workproof preparations. The base and column of the box -like type form a highly reliable and rigid structure. The hull of the spindle with the flange structure minimizes the effect of thermal deformation and vibration, providing stable and accurate cutting.
Taisin horizontal processing center with CNC High accuracy HMC TXHD-630
Horizontal processing centers with CNC and automatic Pallet change devices are developed taking into account efficiency and reliability. HMC is also more durable and has a large tool for storing tools. This design increases repeatability and general versatility. If you are simply looking for a more reliable solution than a vertical processing center, there are also horizontal processing centers without a pallet change device.
Taisin Metal 3D printer ISLM500D
Selective laser melting of metals (SLM) is a 3D printing technology in which metal powder is used for direct printing of metal parts. When printing, the scraper applies a layer of metal powder to the supporting plate of the molding cylinder, and the laser beam selectively melts the powder in accordance with the transverse section profile of each layer of the part for processing the current layer. After the sintering of one layer is completed, the lifting system reduces the height of one layer of cross section. The video for the distribution of the powder distributes another layer of metal powder into the formed layer of cross section and sins the next layer. This is the layer by the layer. Until the whole part is in a way. The entire molding process is carried out in a technological chamber, vacuumed or filled with protective gas to prevent metal reaction with other gases at high temperatures.
Please leave us a message
- Russian
- English
- French
- German
- Portuguese
- Spanish
- Japanese
- Korean
- Arabic
- Turkish
- Italian
- Indonesian
- Swedish
- Belarusian
- Bengali
- Telugu
- Ukrainian
- Uzbek
- Vietnamese