Products
-
Taisin Metal 3D printer ISLM350D
-
Taisin Metal 3D printer IDEN160
-
Taisin Light-adopted 3D printer ISL1100
-
Taisin Vertical CNC TXLC-500 CNC
-
Taisin high-speed drilling and threaded machine TX-T6
-
Taisin high-precision vertical processing center with CNC VMC TXP-1890
-
Taisin Metal 3D printer SLM280
-
Taisin Light-adoptive 3D printer SLA500
-
Taisin Pyatioseva CNC processing center for machining TXMT-21042
-
Taisin Light-adoptive 3D printer SLA800
-
Taisin Gravity-milling machine EMC-650
-
Taisin Light-adoptive 3D printer SLA550
-
Taisin Light-adopted 3D printer SLA6036
-
Taisin Metal 3D printer ISLM350DN
-
Taisin portal processing center YBM-2015
-
Taisin high-speed five-axis processing center TX-UC400
Taisin Light-adoptive 3D printer SLA200
Stereolithography (SLA) is a high-speed and high-precision 3D printing technology. Details are printed using a UV laser and a liquid photopolymer, cured by UV radiation-“photopolymer”. The laser beam is controlled to scan the surface of the liquid resin, so that the surface of the liquid resin hardens, forming the scanned film of the cross section of the part. After curing one layer, cover the newly formed layer with another layer of liquid resin and continue scanning to harden and combine it with the cross section of the previously rejected part. This happens forward and backward, a layer by a layer to print a full three -dimensional part.
Description
marker
Introduction of the product
Stereolithography (SLA) is a high-speed and high-precision 3D printing technology. Details are printed using a UV laser and a liquid photopolymer, cured by UV radiation-“photopolymer”. The laser beam is controlled to scan the surface of the liquid resin, so that the surface of the liquid resin hardens, forming the scanned film of the cross section of the part. After curing one layer, cover the newly formed layer with another layer of liquid resin and continue scanning to harden and combine it with the cross section of the previously rejected part. This happens forward and backward, a layer by a layer to print a full three -dimensional part.
Details about the product
Molded parts with the highest detail and the quality of the smooth surface
Accuracy up to 0.05 mm for the manufacture of precision prototypes.
Details can be made in a matter of minutes or hours, depending on the size and complexity of the part.
The possibility of manufacturing various parts and compound nodes.
Smolish materials differ in strength, detail, color, transparency and heat resistance.
Technical characteristics of ISLA200
| Laser system | |
| Lazer type | Solid -state laser with diode pumping nd: yvo₄ |
| Wavelength | 354.7 nm |
| Laser power | 1000 mW |
| Re -coating system | |
| Distribution method | Intellectual positioning is a vacular adsorption coating |
| Normal layer thickness | 0.1 mm |
| Quick creation of layer thickness | 0.1 ~ 0.15 mm |
| Precision thickness of the production layer | 0.05 ~ 0.1 mm |
| Optical scan system | |
| Spot (diameter@1/e²) | 0.08 ~ 0.15 mm |
| Scanning galvanometer | High -speed scanning galvanometer |
| Part scan speed | 6.0 m/s (recommended) |
| Partial jump speed | 10.0 m/s (recommended) |
| The reference speed of production | 30 ~ 50g/h |
| Lifting system | |
| Repeat the accuracy of positioning | ± 0.01 mm |
| Lifting engine | High -precision cervical |
| Test platform | High -precision reference platform |
| Resin tank | |
| Standard volume | About 11 liters with 150 mm (Z) removable resin tank |
| Production platform XY | 200 mm (x) × 160 mm (y) |
| axis z | 150 mm (standardly)/100 mm (on an individual order)/50 mm (on an individual order) |
| The maximum weight of the part | 8 kg at 150 mm (Z) |
| The method of heating resins | Heating with hot air |
| Photosensitive resin | |
| ZR680 | Beautiful white |
| ZR710 | Hard white |
| ZR820 | High transparency |
| Real ABS | Hard yellow |
| Red Wood | Daimukhong |
| Management software | |
| Type of network | Ethernet, TCP/IP, IEEE802.3 |
| Management software | ISLA software (Zero 5.0) for production |
| Data processing software | 3d layer |
| Data interface | CLI files, SLC files, STL files |
| Installation conditions | |
| Power supply | 200 ~ 240 in alternating current, 50/60 Hz, single -phase, 6 A |
| Environmental temperature | 20-26 ° C. |
| Relative humidity | Less than 40%, without hoarfrost |
| The size of the equipment | 0.85 m (w) × 0.75 m (d) × 1.05 m (c) |
| Equipment weight | About 245 kg |
| Warranty period | |
| Laser | 5000 hours or 12 months (depending on what will come earlier) |
| The whole car | 12 months from the date of installation |
Contact us
Related popular products
Taisin Light-adoptive 3D printer SLA800
Stereolithography (SLA) is a high-speed and high-precision 3D printing technology. Details are printed using a UV laser and a liquid photopolymer, cured by UV radiation-“photopolymer”. The laser beam is controlled to scan the surface of the liquid resin, so that the surface of the liquid resin hardens, forming the scanned film of the cross section of the part. After curing one layer, cover the newly formed layer with another layer of liquid resin and continue scanning to harden and combine it with the cross section of the previously rejected part. This happens forward and backward, a layer by a layer to print a full three -dimensional part.
Taisin high-speed five-axis processing center TX-UC400
A high -speed Pyato -axis processing center is a modern CNC machine, which can simultaneously control the movement of several axes when rotating at high speed and is suitable for processing complex curved surfaces and high -precision parts. It is widely used in aerospace, automotive industry, processing of press forms, precision instrumentation and other industries. It can perform multifaceted processing in one clamp, reduce numerous errors of preparation of workpieces, as well as increase production efficiency and processing accuracy. This equipment has powerful flexible processing capabilities and is especially suitable for processing complex three -dimensional curved surfaces and high -precision parts, which significantly increases production automation and product quality.
Taisin Light-adoptive 3D printer SLA500
Stereolithography (SLA) is a high-speed and high-precision 3D printing technology. Details are printed using a UV laser and a liquid photopolymer, cured by UV radiation-“photopolymer”. The laser beam is controlled to scan the surface of the liquid resin, so that the surface of the liquid resin hardens, forming the scanned film of the cross section of the part. After curing one layer, cover the newly formed layer with another layer of liquid resin and continue scanning to harden and combine it with the cross section of the previously rejected part. This happens forward and backward, a layer by a layer to print a full three -dimensional part.
Taisin horizontal processing center with CNC High accuracy HMC TXHD-630
Horizontal processing centers with CNC and automatic Pallet change devices are developed taking into account efficiency and reliability. HMC is also more durable and has a large tool for storing tools. This design increases repeatability and general versatility. If you are simply looking for a more reliable solution than a vertical processing center, there are also horizontal processing centers without a pallet change device.
Taisin portal processing center YBM-2015
The portal processing center is a large -sized high -performance CNC processing equipment specially designed for precision processing of large and complex blanks. Its design uses a portal frame, which has high stiffness and stability, provides a multi -axial connection, has a wide processing range and is suitable for cutting various complex contours. The equipment is equipped with a powerful spindle and a high -precision guide system, which meet the requirements of high -speed and high -precision processing. Portal processing centers are widely used in aerospace, shipbuilding, energy, heavy engineering, the production of press forms and other industries. They are especially suitable for processing large parts, complex curved surfaces and high -precision shapes.
Taisin Light-adoptive 3D printer SLA450
Stereolithography (SLA) is a high-speed and high-precision 3D printing technology. Details are printed using a UV laser and a liquid photopolymer, cured by UV radiation-“photopolymer”. The laser beam is controlled to scan the surface of the liquid resin, so that the surface of the liquid resin hardens, forming the scanned film of the cross section of the part. After curing one layer, cover the newly formed layer with another layer of liquid resin and continue scanning to harden and combine it with the cross section of the previously rejected part. This happens forward and backward, a layer by a layer to print a full three -dimensional part.
Taisin Metal 3D printer ISLM420DN
Selective laser melting of metals (SLM) is a 3D printing technology in which metal powder is used for direct printing of metal parts. When printing, the scraper applies a layer of metal powder to the supporting plate of the molding cylinder, and the laser beam selectively melts the powder in accordance with the transverse section profile of each layer of the part for processing the current layer. After the sintering of one layer is completed, the lifting system reduces the height of one layer of cross section. The video for the distribution of the powder distributes another layer of metal powder into the formed layer of cross section and sins the next layer. This is the layer by the layer. Until the whole part is in a way. The entire molding process is carried out in a technological chamber, vacuumed or filled with protective gas to prevent metal reaction with other gases at high temperatures.
Taisin Metal 3D printer ISLM350DN
Selective laser melting of metals (SLM) is a 3D printing technology in which metal powder is used for direct printing of metal parts. When printing, the scraper applies a layer of metal powder to the supporting plate of the molding cylinder, and the laser beam selectively melts the powder in accordance with the transverse section profile of each layer of the part for processing the current layer. After the sintering of one layer is completed, the lifting system reduces the height of one layer of cross section. The video for the distribution of the powder distributes another layer of metal powder into the formed layer of cross section and sins the next layer. This is the layer by the layer. Until the whole part is in a way. The entire molding process is carried out in a technological chamber, vacuumed or filled with protective gas to prevent metal reaction with other gases at high temperatures.
Taisin Light-adoptive 3D printer SLA1900D
Stereolithography (SLA) is a high-speed and high-precision 3D printing technology. Details are printed using a UV laser and a liquid photopolymer, cured by UV radiation-“photopolymer”. The laser beam is controlled to scan the surface of the liquid resin, so that the surface of the liquid resin hardens, forming the scanned film of the cross section of the part. After curing one layer, cover the newly formed layer with another layer of liquid resin and continue scanning to harden and combine it with the cross section of the previously rejected part. This happens forward and backward, a layer by a layer to print a full three -dimensional part.
Taisin Light-adopted 3D printer SLA660Lite
Stereolithography (SLA) is a high-speed and high-precision 3D printing technology. Details are printed using a UV laser and a liquid photopolymer, cured by UV radiation-“photopolymer”. The laser beam is controlled to scan the surface of the liquid resin, so that the surface of the liquid resin hardens, forming the scanned film of the cross section of the part. After curing one layer, cover the newly formed layer with another layer of liquid resin and continue scanning to harden and combine it with the cross section of the previously rejected part. This happens forward and backward, a layer by a layer to print a full three -dimensional part.
Taisin Light-adoptive 3D printer SLA550EX
Stereolithography (SLA) is a high-speed and high-precision 3D printing technology. Details are printed using a UV laser and a liquid photopolymer, cured by UV radiation-“photopolymer”. The laser beam is controlled to scan the surface of the liquid resin, so that the surface of the liquid resin hardens, forming the scanned film of the cross section of the part. After curing one layer, cover the newly formed layer with another layer of liquid resin and continue scanning to harden and combine it with the cross section of the previously rejected part. This happens forward and backward, a layer by a layer to print a full three -dimensional part.
Taisin processing center for drilling and cutting threads TXT-800
A series of processing centers for drilling and cutting threads is widely used for rapid drilling, cutting threads and milling small parts, such as electronics, plumbing, cars, parts and medical equipment; They are also suitable for small forms and precision processing of copper;
Taisin Gravity-milling machine EMC-650
The gravity-milling machine is a CNC equipment that combines the functions of engraving and milling. It is specially designed for high -precision processing of small parts. It has a high-speed spindle and a high stiffness body, capable of performing accurate processing of complex contours, suitable for processing various metal and non-metallic materials, such as steel, aluminum alloy, copper, plastic, etc. Gravity and milling machines are widely used in the manufacture of press forms, prezizy processing of details, advertising prizes and bushes Production due to their high speed, high accuracy and good surface quality. It is characterized by high processing accuracy, high speed and a wide processing range. It is especially suitable for scenes requiring thin engraving and light milling.
Taisin Metal 3D printer SLM160
Selective laser melting of metals (SLM) is a 3D printing technology in which metal powder is used for direct printing of metal parts. When printing, the scraper applies a layer of metal powder to the supporting plate of the molding cylinder, and the laser beam selectively melts the powder in accordance with the transverse section profile of each layer of the part for processing the current layer. After the sintering of one layer is completed, the lifting system reduces the height of one layer of cross section. The video for the distribution of the powder distributes another layer of metal powder into the formed layer of cross section and sins the next layer. This is the layer by the layer. Until the whole part is in a way. The entire molding process is carried out in a technological chamber, vacuumed or filled with protective gas to prevent metal reaction with other gases at high temperatures.
Taisin Metal 3D printer ISLM800QN
Selective laser melting of metals (SLM) is a 3D printing technology in which metal powder is used for direct printing of metal parts. When printing, the scraper applies a layer of metal powder to the supporting plate of the forming cylinder, and the laser beam selectively melts the powder in accordance with the transverse section of each layer of the part for processing the current layer. After the sintering of one layer is completed, the lifting system reduces the height of one layer of cross section. The video for the distribution of the powder distributes another layer of metal powder into the formed layer of cross section and sins the next layer. This is the layer by the layer. Until the whole part is in a way. The entire molding process is carried out in a technological chamber, vacuumed or filled with protective gas to prevent metal reaction with other gases at high temperatures.
Taisin Metal 3D printer ISLM600QN
Selective laser melting of metals (SLM) is a 3D printing technology in which metal powder is used for direct printing of metal parts. When printing, the scraper applies a layer of metal powder to the supporting plate of the forming cylinder, and the laser beam selectively melts the powder in accordance with the transverse section of each layer of the part for processing the current layer. After the sintering of one layer is completed, the lifting system reduces the height of one layer of cross section. The video for the distribution of the powder distributes another layer of metal powder into the formed layer of cross section and sins the next layer. This is the layer by the layer. Until the whole part is in a way. The entire molding process is carried out in a technological chamber, vacuumed or filled with protective gas to prevent metal reaction with other gases at high temperatures.
Please leave us a message
- Russian
- English
- French
- German
- Portuguese
- Spanish
- Japanese
- Korean
- Arabic
- Turkish
- Italian
- Indonesian
- Swedish
- Belarusian
- Bengali
- Telugu
- Ukrainian
- Uzbek
- Vietnamese