Products
-
Taisin processing center for drilling and cutting threads TXT-800
-
Taisin Light-adoptive 3D printer SLA300
-
Taisin high-speed drilling and threaded machine TX-T6
-
Taisin Light-adopted 3D printer SLA660Lite
-
Taisin portal processing center YBM-2015
-
Taisin Light-adoptive 3D printer SLA800
-
Taisin Light-adoptive 3D printer SLA550EX
-
Taisin Light-adoptive 3D printer SLA450
-
Taisin horizontal processing center YBM-1270
-
Taisin Light-adopted 3D printer SLA1300D
-
Taisin Metal 3D printer ISLM350DN
-
Taisin Metal 3D printer ISLM350D
-
Taisin drilling and threaded-cutting machine with CNC TXT-700
-
Taisin Metal 3D printer ISLM600QN
-
Taisin Light-adopted 3D printer SLA6036
-
Taisin Vertical CNC TXLC-500 CNC
Taisin Light-adoptive 3D printer SLA880
Stereolithography (SLA) is a high-speed and high-precision 3D printing technology. Details are printed using a UV laser and a liquid photopolymer, cured by UV radiation-“photopolymer”. The laser beam is controlled to scan the surface of the liquid resin, so that the surface of the liquid resin hardens, forming the scanned film of the cross section of the part. After curing one layer, cover the newly formed layer with another layer of liquid resin and continue scanning to harden and combine it with the cross section of the previously rejected part. This happens forward and backward, a layer by a layer to print a full three -dimensional part.
Description
marker
Introduction of the product
Stereolithography (SLA) is a high-speed and high-precision 3D printing technology. Details are printed using a UV laser and a liquid photopolymer, cured by UV radiation-“photopolymer”. The laser beam is controlled to scan the surface of the liquid resin, so that the surface of the liquid resin hardens, forming the scanned film of the cross section of the part. After curing one layer, cover the newly formed layer with another layer of liquid resin and continue scanning to harden and combine it with the cross section of the previously rejected part. This happens forward and backward, a layer by a layer to print a full three -dimensional part.
Details about the product
Molded parts with the highest detail and the quality of the smooth surface
Accuracy up to 0.05 mm for the manufacture of precision prototypes.
Details can be made in a matter of minutes or hours, depending on the size and complexity of the part.
The possibility of manufacturing various parts and compound nodes.
Smolish materials differ in strength, detail, color, transparency and heat resistance.
Lubricant Material Specification of ISLA880
| Category | Specification |
| Laser system | Lazer type: solid -state laser with diode pump (nd: yvo₄) Wave length: 354.7 nm Lazer power: 1000/2000/3000 MW |
| Re -coating system | Coating method: intellectual positional-vacuum-adsorption coating. Normal layer thickness: 0.1 mm. The thickness of the fast production layer: 0.1-0.15 mm. The thickness of the layer of precision production: 0.05–0.1 mm. |
| Optical scan system | The diameter of the spot (@1/e²): 0.10–0.16 mm (normal), 0.10-0.50 mm (dynamic scaling) Scanning galvanometer: high -speed scanning galvanometer Part scan speed: 6.0 m/s (recommended) Part jump speed: 10.0 m /s (recommended) |
| The reference speed of production | 90 ~ 220 g/h |
| Lifting system | Repeated positioning accuracy: ± 0.01 mm. Lifting engine: high -precision cervical. Reference platform: marble reference platform. |
| Resin tank | Standard volume: about 345 liters at 400 mm (Z) Production platform XY: 800 mm (x) × 800 mm (Y) Axis Z: 400 mm (standard) / ≤550 mm (by individual order) Maximum weight: 100 kg at 400 mm (Z) Smol heating method: heated with hot air |
| Photosensitive resin | ZR680 (saturated white), ZR710 (strong white), ZR820 (high transparency), Realabs (persistent yellow), redwood (red yoma) |
| Management software | Network type: Ethernet, TCP/IP, IEEE802.3 Management software: ISLA (Zero 5.0) Production software Data processing software: 3DLAYER Data interface: CLI file, SLC file, STL file |
| Installation conditions | Power supply: 200–240 V AC, 50/60 Hz, single -phase, 5/10 A. Environmental temperature: 20–26 ° C. Relative humidity: less than 40 %, without freezing. The dimensions of the device: 1.50 m (width) × 1.40 m (depth). ) × 2.20 m (height) (without computer rack) Equipment weight: about 1000 kg |
| Warranty period | Laser: 5000 hours or 12 months (depending on what will come earlier). Car assembly: 12 months from the date of installation. |
Contact us
Related popular products
Taisin high-speed and high-precision processing center for processing parts TX-V8
A high -speed and high -precision processing center for parts is a CNC processing equipment, which combines the functions of milling, drilling, carving, boring and others. It is specially designed for high -precision and high -speed production. Its nucleus has a high stiffness design and a high -speed spindle equipped with precision linear guides and ball screws to ensure stability and accuracy during processing. The processing center is equipped with a rapid shift system and an effective design of chips removal, which significantly increases the processing efficiency and the level of automation of production. It is widely used in the aerospace industry, automobile details, precision tools, the production of press forms and other areas and is suitable for processing complex forms and high-precision parts with high demand.
Taisin portal processing center with CNC TXM-9038
A two -column vertical processing adapts to the characteristics of traditional two -column machines with high rigidity, a symmetrical structure and high stability. Through the analysis of elements, the structure of the main components is optimized, the dynamic characteristics of the product are improved and the perfect combination of high power, high torque, high efficiency and high -precision processing is achieved. It is suitable for large -scale sectors of heavy processing, such as shipbuilding, metallurgy and petrochemistry.
Taisin horizontal processing center with CNC High accuracy HMC TXHD-630
Horizontal processing centers with CNC and automatic Pallet change devices are developed taking into account efficiency and reliability. HMC is also more durable and has a large tool for storing tools. This design increases repeatability and general versatility. If you are simply looking for a more reliable solution than a vertical processing center, there are also horizontal processing centers without a pallet change device.
Taisin Light-adoptive 3D printer SLA1600D
Stereolithography (SLA) is a high-speed and high-precision 3D printing technology. Details are printed using a UV laser and a liquid photopolymer, cured by UV radiation-“photopolymer”. The laser beam is controlled to scan the surface of the liquid resin, so that the surface of the liquid resin hardens, forming the scanned film of the cross section of the part. After curing one layer, cover the newly formed layer with another layer of liquid resin and continue scanning to harden and combine it with the cross section of the previously rejected part. This happens forward and backward, a layer by a layer to print a full three -dimensional part.
Taisin Metal 3D printer ISLM800QN
Selective laser melting of metals (SLM) is a 3D printing technology in which metal powder is used for direct printing of metal parts. When printing, the scraper applies a layer of metal powder to the supporting plate of the forming cylinder, and the laser beam selectively melts the powder in accordance with the transverse section of each layer of the part for processing the current layer. After the sintering of one layer is completed, the lifting system reduces the height of one layer of cross section. The video for the distribution of the powder distributes another layer of metal powder into the formed layer of cross section and sins the next layer. This is the layer by the layer. Until the whole part is in a way. The entire molding process is carried out in a technological chamber, vacuumed or filled with protective gas to prevent metal reaction with other gases at high temperatures.
Taisin Metal 3D printer ISLM420DN
Selective laser melting of metals (SLM) is a 3D printing technology in which metal powder is used for direct printing of metal parts. When printing, the scraper applies a layer of metal powder to the supporting plate of the molding cylinder, and the laser beam selectively melts the powder in accordance with the transverse section profile of each layer of the part for processing the current layer. After the sintering of one layer is completed, the lifting system reduces the height of one layer of cross section. The video for the distribution of the powder distributes another layer of metal powder into the formed layer of cross section and sins the next layer. This is the layer by the layer. Until the whole part is in a way. The entire molding process is carried out in a technological chamber, vacuumed or filled with protective gas to prevent metal reaction with other gases at high temperatures.
Taisin Metal 3D printer ISLM350D
Selective laser melting of metals (SLM) is a 3D printing technology in which metal powder is used for direct printing of metal parts. When printing, the scraper applies a layer of metal powder to the supporting plate of the molding cylinder, and the laser beam selectively melts the powder in accordance with the transverse section profile of each layer of the part for processing the current layer. After the sintering of one layer is completed, the lifting system reduces the height of one layer of cross section. The video for the distribution of the powder distributes another layer of metal powder into the formed layer of cross section and sins the next layer. This is the layer by the layer. Until the whole part is in a way. The entire molding process is carried out in a technological chamber, vacuumed or filled with protective gas to prevent metal reaction with other gases at high temperatures.
Taisin Light-adopted 3D printer SLA660Lite
Stereolithography (SLA) is a high-speed and high-precision 3D printing technology. Details are printed using a UV laser and a liquid photopolymer, cured by UV radiation-“photopolymer”. The laser beam is controlled to scan the surface of the liquid resin, so that the surface of the liquid resin hardens, forming the scanned film of the cross section of the part. After curing one layer, cover the newly formed layer with another layer of liquid resin and continue scanning to harden and combine it with the cross section of the previously rejected part. This happens forward and backward, a layer by a layer to print a full three -dimensional part.
Taisin Light-adoptive 3D printer SLA800
Stereolithography (SLA) is a high-speed and high-precision 3D printing technology. Details are printed using a UV laser and a liquid photopolymer, cured by UV radiation-“photopolymer”. The laser beam is controlled to scan the surface of the liquid resin, so that the surface of the liquid resin hardens, forming the scanned film of the cross section of the part. After curing one layer, cover the newly formed layer with another layer of liquid resin and continue scanning to harden and combine it with the cross section of the previously rejected part. This happens forward and backward, a layer by a layer to print a full three -dimensional part.
Taisin Metal 3D printer SLM160
Selective laser melting of metals (SLM) is a 3D printing technology in which metal powder is used for direct printing of metal parts. When printing, the scraper applies a layer of metal powder to the supporting plate of the molding cylinder, and the laser beam selectively melts the powder in accordance with the transverse section profile of each layer of the part for processing the current layer. After the sintering of one layer is completed, the lifting system reduces the height of one layer of cross section. The video for the distribution of the powder distributes another layer of metal powder into the formed layer of cross section and sins the next layer. This is the layer by the layer. Until the whole part is in a way. The entire molding process is carried out in a technological chamber, vacuumed or filled with protective gas to prevent metal reaction with other gases at high temperatures.
Taisin drilling and threaded-cutting machine with CNC TXT-700
The centers for drilling and cutting threads are designed to be simple and effective, ideally suitable for accurate, quick and repeated processing processes. A special design for drilling and cutting threads provides maximum efficiency and cutting speed of thread, and also allows you to drill more solid materials. Drilling-rhinated CNC machines are ideal for processing parts with several holes, deep holes or threaded holes.
Taisin high-precision vertical processing center with CNC VMC TXP-1890
The machines of a series of vertical processing centers are based on quick and rigid processing as a basic starting point of design, ensuring mass production, processing accuracy and the efficiency of parts processing. The modular combination of functions of highly effective unloading, fast feed and high -speed spindle can satisfy the individual choice of various needs of customers in processing; All key components affecting the quality of the entire machine are imported high -quality components;
Taisin Pyatioseva CNC processing center for machining TXMT-21042
A five -axis machine is a modern CNC processing equipment with five independently moving axes that can be accurately controlled in directions X, Y, Z, A and B to achieve effective and high -precision processing of complex parts. The machine adds two rotation axes (usually axis A and axis B), which allows the tool to approach the workpiece at any angle, which significantly increases the flexibility and efficiency of processing. The main advantages of five -axle machines: high efficiency, high accuracy, an increased service life, suitable for complex parts.
Taisin processing center for drilling and cutting threads TXT-800
A series of processing centers for drilling and cutting threads is widely used for rapid drilling, cutting threads and milling small parts, such as electronics, plumbing, cars, parts and medical equipment; They are also suitable for small forms and precision processing of copper;
Taisin Light-adoptive 3D printer SLA1900D
Stereolithography (SLA) is a high-speed and high-precision 3D printing technology. Details are printed using a UV laser and a liquid photopolymer, cured by UV radiation-“photopolymer”. The laser beam is controlled to scan the surface of the liquid resin, so that the surface of the liquid resin hardens, forming the scanned film of the cross section of the part. After curing one layer, cover the newly formed layer with another layer of liquid resin and continue scanning to harden and combine it with the cross section of the previously rejected part. This happens forward and backward, a layer by a layer to print a full three -dimensional part.
Taisin Metal 3D printer IDEN160
Selective laser melting of metals (SLM) is a 3D printing technology in which metal powder is used for direct printing of metal parts. When printing, the scraper applies a layer of metal powder to the supporting plate of the molding cylinder, and the laser beam selectively melts the powder in accordance with the transverse section profile of each layer of the part for processing the current layer. After the sintering of one layer is completed, the lifting system reduces the height of one layer of cross section. The video for the distribution of the powder distributes another layer of metal powder into the formed layer of cross section and sins the next layer. This is the layer by the layer. Until the whole part is in a way. The entire molding process is carried out in a technological chamber, vacuumed or filled with protective gas to prevent metal reaction with other gases at high temperatures.
Please leave us a message
- Russian
- English
- French
- German
- Portuguese
- Spanish
- Japanese
- Korean
- Arabic
- Turkish
- Italian
- Indonesian
- Swedish
- Belarusian
- Bengali
- Telugu
- Ukrainian
- Uzbek
- Vietnamese