Products
-
Taisin Vertical CNC TXLC-500 CNC
-
Taisin Metal 3D printer ISLM600QN
-
Taisin portal processing center YBM-2015
-
Taisin portal processing center with CNC TXM-9038
-
Taisin Light-adopted 3D printer SLA1300D
-
Taisin Light-adoptive 3D printer SLA200
-
Taisin Light-adoptive 3D printer SLA500
-
Taisin high-speed and high-precision processing center for processing parts TX-V8
-
Taisin Light-adoptive 3D printer SLA550EX
-
Taisin Light-adopted 3D printer SLA660
-
Taisin Light-adopted 3D printer SLA660Lite
-
Taisin Light-adoptive 3D printer SLA1900D
-
Taisin Light-adoptive 3D printer SLA550
-
Taisin Light-adoptive 3D printer SLA880
-
Taisin high-precision vertical processing center with CNC VMC TXP-1890
-
Taisin Light-adopted 3D printer SLA6036
Taisin high-speed drilling and threaded machine TX-T6
A high -speed machine for drilling and cutting threads is an effective technological equipment that combines the functions of drilling and cutting threads. It is specially designed for the requirements of high accuracy and high -speed processing. This equipment uses an advanced CNC system and a high -speed spindle, which allow you to perform complex drilling and cutting threads with several holes in a short time. It has the characteristics of high stability, high accuracy and significantly improved production efficiency and is suitable for mass production and accurate processing of complex parts. It is widely used in the automotive industry, electronic products, aerospace, machine -building and other industries and is especially suitable for rapid processing of metal, plastic and other materials.
Description
marker
Introduction of the product
A high -speed machine for drilling and cutting threads is an effective technological equipment that combines the functions of drilling and cutting threads. It is specially designed for the requirements of high accuracy and high -speed processing. This equipment uses an advanced CNC system and a high -speed spindle, which allow you to perform complex drilling and cutting threads with several holes in a short time. It has the characteristics of high stability, high accuracy and significantly improved production efficiency and is suitable for mass production and accurate processing of complex parts. It is widely used in the automotive industry, electronic products, aerospace, machine -building and other industries and is especially suitable for rapid processing of metal, plastic and other materials.
Details about the product
The main design is made of high -quality mechanical cast iron, durable, but light and flexible, with a quick response and a small occupied area;
The design of the spindle with direct connection, high -speed work, low vibration, low noise, low temperature growth, etc., is suitable for prolonged high -speed work;
Three axes are equipped with precision linear guides, which have high rigidity, low noise, rapid movement and excellent stability;
Equipped with a ball-screw pair of large diameter to satisfy the requirements of various speeds and submission permits;
A three-axle engine and a ball-screw gear have a direct drive, provide high positioning accuracy and the absence of problems with the play;
The construction of the case is ergonomic, and mechanical protection from sheet metal is optimized for simplicity of operation.
The main technical parameters
| project | TX-T600 | TX-T1000 | TX-T2000 |
| Moving along the axis x | 600 | 1000 | 2000 |
| Moving along the Y axis | 450 | 500 | 500 |
| Moving along the axis z | 330 | 330 | 330 |
| Spindle's nose to the working surface | 150-480 | 150-480 | 150-480 |
| Spindle connection | 15000/20000 | 15000/20000 | 20,000/24000 |
| Spindle cone | BT30 | BT30 | BT30 |
| Spindle engine (continuously/30-minute freezing) | 5.5 | 5.5 | 5.5 |
| The three -axic engine X.Y.2 | 1.5/1.5/3.0 | 2.0/2.0/3.0 | 3.0/3.0/3.0 |
| Working area | 700x420 | 1100x500 | 2100 × 500 |
| T -shaped groove (width - number of grooves x distance) | 3-14 × 125 | 3-18 × 100 | 3-18x100 |
| Maximum load on the workbench | 300 | 400 | 600 |
| Three -axle fast movement | 48000 | 48000 | 36000 |
| Folding speed | 1-10000 | 1-10000 | 1-10000 |
| Positioning accuracy | ± 0.005300 | ± 0.005/300 | ± 0.005/300 |
| The accuracy of repetition | ± 0.003/300 | ± 0.003/300 | ± 0.005/300 |
| System configuration | Fanuc /Mitsubish | ||
| The number of tools | 21 | 21 | 21 |
| The maximum available tool diameter | 60/80 | 60/80 | 60V80 |
| Tool replacement method | Type of clamping lever | Type of clamping lever | Type of clamping lever |
| Mechanical dimensions | 1950 × 2455 × 2400 | 2700 × 2300 × 2500 | 3200*2400*2800 |
| Mechanical weight | 3300 | 4500 | 7500 |
Technical characteristics IDEN160
Laser system
Laser system type laser Voloconium laser
Wavelength 1064 nm
Laser power 500 W
re -coating system
The re -coating system system for applying the coating: the scraper distributes the powder in two directions.
The thickness of the normal layer is 0.03 mm.
Fast the thickness of the layer 0.03 ~ 0.10 mm.
The thickness of the precision production layer is 0.02 ~ 0.03 mm.
Optical scan system
Optical and scanning stain (diameter @ 1/e²) 0.05 ~ 0.15 mm
Scanning galvanometer Scanlab
Part scan speed 2.0 m/s (recommended)
Partial jump speed 10.0 m/s (recommended)
Estimated speed of production: 1200 dental crowns/24 hours, 75 dental braces/24 hours.
Protection system
Shield system gas protection nitrogen, argon (active metal materials must be protected by argon)
Stream regulator: intellectual adjustment 0-3 l/min.
Dusting control and an effective protective gas circulation system
Dust removal fourth level of removal and dust cleaning
Make a vat
The standard volume of VAT is about 5 liters.
Production platform XY 160 mm (x) × 160 mm (Y) (excluding fillets, etc.)
A axis Z 200 mm (including the thickness of the substrate)
The maximum weight of the part is 10 kg.
Fast replacement of the substrate assembly and disassembly without holes for the screws and fast replacement of the transition compartment
Precise Servigator of the drive engine
Type of heating: precision heating of resistance wires
Molding materials: pure titanium, titanium alloy, cobalt chromium alloy, etc.
Management software
Ethernet, TCP/IP, IEEE802.3 network software software
ISLM 4.0 control software, special software for dental production
3Dlayer data processing software (multi -level processing software with three -dimensional support)
Data CLI file, SLC file, STL file
Installation conditions
Equipment conditions of power supply 220 V (± 10 %) alternating current, 50/60 Hz, single -phase, 16 A.
Environmental temperature 20-26 ° C
Relative humidity is below 40%, without frost.
Equipment size is 1.10 m (w) × 1.30 m (g) × 1.85 m (c)
Equipment weight is about 1000 kg.
Warranty period
A guarantee for a laser 5000 hours or 12 months (depending on what will come earlier)
The life of the entire machine is 12 months from the date of installation.
Contact us
Related popular products
Taisin Light-adoptive 3D printer SLA550EX
Stereolithography (SLA) is a high-speed and high-precision 3D printing technology. Details are printed using a UV laser and a liquid photopolymer, cured by UV radiation-“photopolymer”. The laser beam is controlled to scan the surface of the liquid resin, so that the surface of the liquid resin hardens, forming the scanned film of the cross section of the part. After curing one layer, cover the newly formed layer with another layer of liquid resin and continue scanning to harden and combine it with the cross section of the previously rejected part. This happens forward and backward, a layer by a layer to print a full three -dimensional part.
Taisin Light-adopted 3D printer SLA1300D
Stereolithography (SLA) is a high-speed and high-precision 3D printing technology. Details are printed using a UV laser and a liquid photopolymer, cured by UV radiation-“photopolymer”. The laser beam is controlled to scan the surface of the liquid resin, so that the surface of the liquid resin hardens, forming the scanned film of the cross section of the part. After curing one layer, cover the newly formed layer with another layer of liquid resin and continue scanning to harden and combine it with the cross section of the previously rejected part. This happens forward and backward, a layer by a layer to print a full three -dimensional part.
Taisin Metal 3D printer ISLM800QN
Selective laser melting of metals (SLM) is a 3D printing technology in which metal powder is used for direct printing of metal parts. When printing, the scraper applies a layer of metal powder to the supporting plate of the forming cylinder, and the laser beam selectively melts the powder in accordance with the transverse section of each layer of the part for processing the current layer. After the sintering of one layer is completed, the lifting system reduces the height of one layer of cross section. The video for the distribution of the powder distributes another layer of metal powder into the formed layer of cross section and sins the next layer. This is the layer by the layer. Until the whole part is in a way. The entire molding process is carried out in a technological chamber, vacuumed or filled with protective gas to prevent metal reaction with other gases at high temperatures.
Taisin Light-adoptive 3D printer SLA1900D
Stereolithography (SLA) is a high-speed and high-precision 3D printing technology. Details are printed using a UV laser and a liquid photopolymer, cured by UV radiation-“photopolymer”. The laser beam is controlled to scan the surface of the liquid resin, so that the surface of the liquid resin hardens, forming the scanned film of the cross section of the part. After curing one layer, cover the newly formed layer with another layer of liquid resin and continue scanning to harden and combine it with the cross section of the previously rejected part. This happens forward and backward, a layer by a layer to print a full three -dimensional part.
Taisin Metal 3D printer IDEN160
Selective laser melting of metals (SLM) is a 3D printing technology in which metal powder is used for direct printing of metal parts. When printing, the scraper applies a layer of metal powder to the supporting plate of the molding cylinder, and the laser beam selectively melts the powder in accordance with the transverse section profile of each layer of the part for processing the current layer. After the sintering of one layer is completed, the lifting system reduces the height of one layer of cross section. The video for the distribution of the powder distributes another layer of metal powder into the formed layer of cross section and sins the next layer. This is the layer by the layer. Until the whole part is in a way. The entire molding process is carried out in a technological chamber, vacuumed or filled with protective gas to prevent metal reaction with other gases at high temperatures.
Taisin Gravity-milling machine EMC-650
The gravity-milling machine is a CNC equipment that combines the functions of engraving and milling. It is specially designed for high -precision processing of small parts. It has a high-speed spindle and a high stiffness body, capable of performing accurate processing of complex contours, suitable for processing various metal and non-metallic materials, such as steel, aluminum alloy, copper, plastic, etc. Gravity and milling machines are widely used in the manufacture of press forms, prezizy processing of details, advertising prizes and bushes Production due to their high speed, high accuracy and good surface quality. It is characterized by high processing accuracy, high speed and a wide processing range. It is especially suitable for scenes requiring thin engraving and light milling.
Taisin Vertical CNC TXLC-500 CNC
A vertically tokure machine (WTL) is one of the most traditional types of machine tools. They are ideal for heavy processing of medium and large parts. As technology develops, vertical turning machines become more universal. Our vertical turning machines increase performance due to stable processing of thin -walled blanks and workproof preparations. The base and column of the box -like type form a highly reliable and rigid structure. The hull of the spindle with the flange structure minimizes the effect of thermal deformation and vibration, providing stable and accurate cutting.
Taisin Metal 3D printer SLM280
Selective laser melting of metals (SLM) is a 3D printing technology in which metal powder is used for direct printing of metal parts. When printing, the scraper applies a layer of metal powder to the supporting plate of the molding cylinder, and the laser beam selectively melts the powder in accordance with the transverse section profile of each layer of the part for processing the current layer. After the sintering of one layer is completed, the lifting system reduces the height of one layer of cross section. The video for the distribution of the powder distributes another layer of metal powder into the formed layer of cross section and sins the next layer. This is the layer by the layer. Until the whole part is in a way. The entire molding process is carried out in a technological chamber, vacuumed or filled with protective gas to prevent metal reaction with other gases at high temperatures.
Taisin Light-adoptive 3D printer SLA200
Stereolithography (SLA) is a high-speed and high-precision 3D printing technology. Details are printed using a UV laser and a liquid photopolymer, cured by UV radiation-“photopolymer”. The laser beam is controlled to scan the surface of the liquid resin, so that the surface of the liquid resin hardens, forming the scanned film of the cross section of the part. After curing one layer, cover the newly formed layer with another layer of liquid resin and continue scanning to harden and combine it with the cross section of the previously rejected part. This happens forward and backward, a layer by a layer to print a full three -dimensional part.
Taisin Light-adoptive 3D printer SLA550
Stereolithography (SLA) is a high-speed and high-precision 3D printing technology. Details are printed using a UV laser and a liquid photopolymer, cured by UV radiation-“photopolymer”. The laser beam is controlled to scan the surface of the liquid resin, so that the surface of the liquid resin hardens, forming the scanned film of the cross section of the part. After curing one layer, cover the newly formed layer with another layer of liquid resin and continue scanning to harden and combine it with the cross section of the previously rejected part. This happens forward and backward, a layer by a layer to print a full three -dimensional part.
Taisin horizontal processing center with CNC High accuracy HMC TXHD-630
Horizontal processing centers with CNC and automatic Pallet change devices are developed taking into account efficiency and reliability. HMC is also more durable and has a large tool for storing tools. This design increases repeatability and general versatility. If you are simply looking for a more reliable solution than a vertical processing center, there are also horizontal processing centers without a pallet change device.
Taisin Metal 3D printer ISLM350DN
Selective laser melting of metals (SLM) is a 3D printing technology in which metal powder is used for direct printing of metal parts. When printing, the scraper applies a layer of metal powder to the supporting plate of the molding cylinder, and the laser beam selectively melts the powder in accordance with the transverse section profile of each layer of the part for processing the current layer. After the sintering of one layer is completed, the lifting system reduces the height of one layer of cross section. The video for the distribution of the powder distributes another layer of metal powder into the formed layer of cross section and sins the next layer. This is the layer by the layer. Until the whole part is in a way. The entire molding process is carried out in a technological chamber, vacuumed or filled with protective gas to prevent metal reaction with other gases at high temperatures.
Taisin drilling and threaded-cutting machine with CNC TXT-700
The centers for drilling and cutting threads are designed to be simple and effective, ideally suitable for accurate, quick and repeated processing processes. A special design for drilling and cutting threads provides maximum efficiency and cutting speed of thread, and also allows you to drill more solid materials. Drilling-rhinated CNC machines are ideal for processing parts with several holes, deep holes or threaded holes.
Taisin portal processing center with CNC TXM-9038
A two -column vertical processing adapts to the characteristics of traditional two -column machines with high rigidity, a symmetrical structure and high stability. Through the analysis of elements, the structure of the main components is optimized, the dynamic characteristics of the product are improved and the perfect combination of high power, high torque, high efficiency and high -precision processing is achieved. It is suitable for large -scale sectors of heavy processing, such as shipbuilding, metallurgy and petrochemistry.
Taisin Light-adopted 3D printer SLA660
Stereolithography (SLA) is a high-speed and high-precision 3D printing technology. Details are printed using a UV laser and a liquid photopolymer, cured by UV radiation-“photopolymer”. The laser beam is controlled to scan the surface of the liquid resin, so that the surface of the liquid resin hardens, forming the scanned film of the cross section of the part. After curing one layer, cover the newly formed layer with another layer of liquid resin and continue scanning to harden and combine it with the cross section of the previously rejected part. This happens forward and backward, a layer by a layer to print a full three -dimensional part.
Taisin Metal 3D printer ISLM600QN
Selective laser melting of metals (SLM) is a 3D printing technology in which metal powder is used for direct printing of metal parts. When printing, the scraper applies a layer of metal powder to the supporting plate of the forming cylinder, and the laser beam selectively melts the powder in accordance with the transverse section of each layer of the part for processing the current layer. After the sintering of one layer is completed, the lifting system reduces the height of one layer of cross section. The video for the distribution of the powder distributes another layer of metal powder into the formed layer of cross section and sins the next layer. This is the layer by the layer. Until the whole part is in a way. The entire molding process is carried out in a technological chamber, vacuumed or filled with protective gas to prevent metal reaction with other gases at high temperatures.
Please leave us a message
- Russian
- English
- French
- German
- Portuguese
- Spanish
- Japanese
- Korean
- Arabic
- Turkish
- Italian
- Indonesian
- Swedish
- Belarusian
- Bengali
- Telugu
- Ukrainian
- Uzbek
- Vietnamese