Products
-
Taisin Light-adopted 3D printer SLA660
-
Taisin Metal 3D printer ISLM800QN
-
Taisin Light-adoptive 3D printer SLA550EX
-
Taisin drilling and threaded-cutting machine with CNC TXT-700
-
Taisin Light-adoptive 3D printer SLA550
-
Taisin Metal 3D printer SLM160
-
Taisin Gravity-milling machine EMC-650
-
Taisin Light-adoptive 3D printer SLA500
-
Taisin Pyatioseva CNC processing center for machining TXMT-21042
-
Taisin horizontal processing center with CNC High accuracy HMC TXHD-630
-
Taisin Light-adoptive 3D printer SLA1900D
-
Taisin Metal 3D printer ISLM420DN
-
Taisin Metal 3D printer ISLM350DN
-
Taisin horizontal processing center YBM-1270
-
Taisin Vertical CNC TXLC-500 CNC
-
Taisin Metal 3D printer ISLM500D
Taisin Light-adopted 3D printer SLA1300D
Stereolithography (SLA) is a high-speed and high-precision 3D printing technology. Details are printed using a UV laser and a liquid photopolymer, cured by UV radiation-“photopolymer”. The laser beam is controlled to scan the surface of the liquid resin, so that the surface of the liquid resin hardens, forming the scanned film of the cross section of the part. After curing one layer, cover the newly formed layer with another layer of liquid resin and continue scanning to harden and combine it with the cross section of the previously rejected part. This happens forward and backward, a layer by a layer to print a full three -dimensional part.
Description
marker
Introduction of the product
Stereolithography (SLA) is a high-speed and high-precision 3D printing technology. Details are printed using a UV laser and a liquid photopolymer, cured by UV radiation-“photopolymer”. The laser beam is controlled to scan the surface of the liquid resin, so that the surface of the liquid resin hardens, forming the scanned film of the cross section of the part. After curing one layer, cover the newly formed layer with another layer of liquid resin and continue scanning to harden and combine it with the cross section of the previously rejected part. This happens forward and backward, a layer by a layer to print a full three -dimensional part.
Details about the product
Molded parts with the highest detail and the quality of the smooth surface
Accuracy up to 0.05 mm for the manufacture of precision prototypes.
Details can be made in a matter of minutes or hours, depending on the size and complexity of the part.
The possibility of manufacturing various parts and compound nodes.
Smolish materials differ in strength, detail, color, transparency and heat resistance.
Specification of ISLA1300D
| Category | Specification |
| Laser system | Number of lasers: double laser Lazer type: solid -state laser with diode pump (nd: yvo₄) Wave length: 354.7 nm Lazer power: 1000/2000/3000 MW |
| Re -coating system | Coating method: intellectual positional-vacuum-adsorption coating. Normal layer thickness: 0.1 mm. The thickness of the fast production layer: 0.1-0.15 mm. The thickness of the layer of precision production: 0.05–0.1 mm. |
| Optical scan system | The diameter of the spot (@1/e²): 0.10–0.16 mm (normal), 0.10-0.50 mm (dynamic scaling) Scanning galvanometer: high -speed scanning galvanometer (double galvanometer) Part scan speed: 6.0–20.0 m/s (recommended) Details speed: 20.0–40.0 m/s (recommended). |
| The reference speed of production | 150 ~ 400 g/h (super × 2 | double galvanometer) |
| lifting system | Repeated positioning accuracy: ± 0.01 mm. Lifting engine: high -precision cervical. Reference platform: marble reference platform. |
| Resin tank | Standard volume: about 880 liters at 600 mm (Z) Production platform: 1300 mm (x) × 750 mm (Y) × 600 mm (Z) Maximum weight: 140 kg at 600 mm (Z) Resin heating method: precision resistance wire heating |
| Photosensitive resin | ZR680 (saturated white), ZR710 (strong white), ZR820 (high transparency), Realabs (persistent yellow), redwood (red yoma) |
| Management software | Network type: Ethernet, TCP/IP, IEEE802.3 Management software: ISLA (Zero 5.0) Production software Data processing software: 3DLAYER Data interface: CLI file, SLC file, STL file |
| Installation conditions | Power supply: 200 ~ 240 V AC, 50/60 Hz, single -phase, 5/17 A. Environmental temperature: 20–26 ° C. Relative humidity: less than 40 %, without freezing. The dimensions of the device: 2.20 m (width) × 1.60 m (depth). ) × 2.30 m (height) (without a computer rack) Equipment weight: about 1600 kg |
| Warranty period | Laser: 5000 hours or 12 months (depending on what will come earlier). Car assembly: 12 months from the date of installation. |
Contact us
Related popular products
Taisin Metal 3D printer IDEN160
Selective laser melting of metals (SLM) is a 3D printing technology in which metal powder is used for direct printing of metal parts. When printing, the scraper applies a layer of metal powder to the supporting plate of the molding cylinder, and the laser beam selectively melts the powder in accordance with the transverse section profile of each layer of the part for processing the current layer. After the sintering of one layer is completed, the lifting system reduces the height of one layer of cross section. The video for the distribution of the powder distributes another layer of metal powder into the formed layer of cross section and sins the next layer. This is the layer by the layer. Until the whole part is in a way. The entire molding process is carried out in a technological chamber, vacuumed or filled with protective gas to prevent metal reaction with other gases at high temperatures.
Taisin Metal 3D printer ISLM350D
Selective laser melting of metals (SLM) is a 3D printing technology in which metal powder is used for direct printing of metal parts. When printing, the scraper applies a layer of metal powder to the supporting plate of the molding cylinder, and the laser beam selectively melts the powder in accordance with the transverse section profile of each layer of the part for processing the current layer. After the sintering of one layer is completed, the lifting system reduces the height of one layer of cross section. The video for the distribution of the powder distributes another layer of metal powder into the formed layer of cross section and sins the next layer. This is the layer by the layer. Until the whole part is in a way. The entire molding process is carried out in a technological chamber, vacuumed or filled with protective gas to prevent metal reaction with other gases at high temperatures.
Taisin Light-adopted 3D printer SLA660
Stereolithography (SLA) is a high-speed and high-precision 3D printing technology. Details are printed using a UV laser and a liquid photopolymer, cured by UV radiation-“photopolymer”. The laser beam is controlled to scan the surface of the liquid resin, so that the surface of the liquid resin hardens, forming the scanned film of the cross section of the part. After curing one layer, cover the newly formed layer with another layer of liquid resin and continue scanning to harden and combine it with the cross section of the previously rejected part. This happens forward and backward, a layer by a layer to print a full three -dimensional part.
Taisin Light-adoptive 3D printer SLA500
Stereolithography (SLA) is a high-speed and high-precision 3D printing technology. Details are printed using a UV laser and a liquid photopolymer, cured by UV radiation-“photopolymer”. The laser beam is controlled to scan the surface of the liquid resin, so that the surface of the liquid resin hardens, forming the scanned film of the cross section of the part. After curing one layer, cover the newly formed layer with another layer of liquid resin and continue scanning to harden and combine it with the cross section of the previously rejected part. This happens forward and backward, a layer by a layer to print a full three -dimensional part.
Taisin Metal 3D printer SLM280
Selective laser melting of metals (SLM) is a 3D printing technology in which metal powder is used for direct printing of metal parts. When printing, the scraper applies a layer of metal powder to the supporting plate of the molding cylinder, and the laser beam selectively melts the powder in accordance with the transverse section profile of each layer of the part for processing the current layer. After the sintering of one layer is completed, the lifting system reduces the height of one layer of cross section. The video for the distribution of the powder distributes another layer of metal powder into the formed layer of cross section and sins the next layer. This is the layer by the layer. Until the whole part is in a way. The entire molding process is carried out in a technological chamber, vacuumed or filled with protective gas to prevent metal reaction with other gases at high temperatures.
Taisin high-speed and high-precision processing center for processing parts TX-V8
A high -speed and high -precision processing center for parts is a CNC processing equipment, which combines the functions of milling, drilling, carving, boring and others. It is specially designed for high -precision and high -speed production. Its nucleus has a high stiffness design and a high -speed spindle equipped with precision linear guides and ball screws to ensure stability and accuracy during processing. The processing center is equipped with a rapid shift system and an effective design of chips removal, which significantly increases the processing efficiency and the level of automation of production. It is widely used in the aerospace industry, automobile details, precision tools, the production of press forms and other areas and is suitable for processing complex forms and high-precision parts with high demand.
Taisin processing center for drilling and cutting threads TXT-800
A series of processing centers for drilling and cutting threads is widely used for rapid drilling, cutting threads and milling small parts, such as electronics, plumbing, cars, parts and medical equipment; They are also suitable for small forms and precision processing of copper;
Taisin portal processing center YBM-2015
The portal processing center is a large -sized high -performance CNC processing equipment specially designed for precision processing of large and complex blanks. Its design uses a portal frame, which has high stiffness and stability, provides a multi -axial connection, has a wide processing range and is suitable for cutting various complex contours. The equipment is equipped with a powerful spindle and a high -precision guide system, which meet the requirements of high -speed and high -precision processing. Portal processing centers are widely used in aerospace, shipbuilding, energy, heavy engineering, the production of press forms and other industries. They are especially suitable for processing large parts, complex curved surfaces and high -precision shapes.
Taisin Light-adoptive 3D printer SLA550EX
Stereolithography (SLA) is a high-speed and high-precision 3D printing technology. Details are printed using a UV laser and a liquid photopolymer, cured by UV radiation-“photopolymer”. The laser beam is controlled to scan the surface of the liquid resin, so that the surface of the liquid resin hardens, forming the scanned film of the cross section of the part. After curing one layer, cover the newly formed layer with another layer of liquid resin and continue scanning to harden and combine it with the cross section of the previously rejected part. This happens forward and backward, a layer by a layer to print a full three -dimensional part.
Taisin Light-adopted 3D printer SLA6036
Stereolithography (SLA) is a high-speed and high-precision 3D printing technology. Details are printed using a UV laser and a liquid photopolymer, cured by UV radiation-“photopolymer”. The laser beam is controlled to scan the surface of the liquid resin, so that the surface of the liquid resin hardens, forming the scanned film of the cross section of the part. After curing one layer, cover the newly formed layer with another layer of liquid resin and continue scanning to harden and combine it with the cross section of the previously rejected part. This happens forward and backward, a layer by a layer to print a full three -dimensional part.
Taisin three-wire rail molding machine of high stiffness TX-6027
A three-line reforming machine of high stiffness is a high-performance machine specially designed for processing press forms and has excellent rigidity and stability. This model uses a three -line design of the guide, which significantly increases the vibration resistance and carrying capacity of the machine, providing stable and accurate cutting performance during high -precision processing. Especially suitable for processing large, complex shapes and materials of high hardness. Due to the excellent accuracy and stability of processing, it is widely used in the production of press forms in cars, household appliances, plastics, pressure under pressure and other industries. It can effectively reduce processing time and increase production efficiency and product quality.
Taisin Light-adoptive 3D printer SLA1600D
Stereolithography (SLA) is a high-speed and high-precision 3D printing technology. Details are printed using a UV laser and a liquid photopolymer, cured by UV radiation-“photopolymer”. The laser beam is controlled to scan the surface of the liquid resin, so that the surface of the liquid resin hardens, forming the scanned film of the cross section of the part. After curing one layer, cover the newly formed layer with another layer of liquid resin and continue scanning to harden and combine it with the cross section of the previously rejected part. This happens forward and backward, a layer by a layer to print a full three -dimensional part.
Taisin portal processing center with CNC TXM-9038
A two -column vertical processing adapts to the characteristics of traditional two -column machines with high rigidity, a symmetrical structure and high stability. Through the analysis of elements, the structure of the main components is optimized, the dynamic characteristics of the product are improved and the perfect combination of high power, high torque, high efficiency and high -precision processing is achieved. It is suitable for large -scale sectors of heavy processing, such as shipbuilding, metallurgy and petrochemistry.
Taisin Metal 3D printer ISLM350DN
Selective laser melting of metals (SLM) is a 3D printing technology in which metal powder is used for direct printing of metal parts. When printing, the scraper applies a layer of metal powder to the supporting plate of the molding cylinder, and the laser beam selectively melts the powder in accordance with the transverse section profile of each layer of the part for processing the current layer. After the sintering of one layer is completed, the lifting system reduces the height of one layer of cross section. The video for the distribution of the powder distributes another layer of metal powder into the formed layer of cross section and sins the next layer. This is the layer by the layer. Until the whole part is in a way. The entire molding process is carried out in a technological chamber, vacuumed or filled with protective gas to prevent metal reaction with other gases at high temperatures.
Taisin Light-adoptive 3D printer SLA300
Stereolithography (SLA) is a high-speed and high-precision 3D printing technology. Details are printed using a UV laser and a liquid photopolymer, cured by UV radiation-“photopolymer”. The laser beam is controlled to scan the surface of the liquid resin, so that the surface of the liquid resin hardens, forming the scanned film of the cross section of the part. After curing one layer, cover the newly formed layer with another layer of liquid resin and continue scanning to harden and combine it with the cross section of the previously rejected part. This happens forward and backward, a layer by a layer to print a full three -dimensional part.
Taisin Light-adoptive 3D printer SLA200
Stereolithography (SLA) is a high-speed and high-precision 3D printing technology. Details are printed using a UV laser and a liquid photopolymer, cured by UV radiation-“photopolymer”. The laser beam is controlled to scan the surface of the liquid resin, so that the surface of the liquid resin hardens, forming the scanned film of the cross section of the part. After curing one layer, cover the newly formed layer with another layer of liquid resin and continue scanning to harden and combine it with the cross section of the previously rejected part. This happens forward and backward, a layer by a layer to print a full three -dimensional part.
Please leave us a message
- Russian
- English
- French
- German
- Portuguese
- Spanish
- Japanese
- Korean
- Arabic
- Turkish
- Italian
- Indonesian
- Swedish
- Azerbaijani
- Belarusian
- Bengali
- Bosnian
- Bulgarian
- Telugu
- Ukrainian
- Uzbek
- Vietnamese