Products
-
Taisin horizontal processing center with CNC High accuracy HMC TXHD-630
-
Taisin Light-adopted 3D printer SLA6036
-
Taisin Light-adopted 3D printer SLA660Lite
-
Taisin Light-adoptive 3D printer SLA1600D
-
Taisin portal processing center YBM-2015
-
Taisin Metal 3D printer ISLM600QN
-
Taisin Metal 3D printer ISLM500D
-
Taisin Light-adoptive 3D printer SLA800
-
Taisin Metal 3D printer SLM280
-
Taisin Metal 3D printer SLM160
-
Taisin Pyatioseva CNC processing center for machining TXMT-21042
-
Taisin Light-adopted 3D printer SLA660
-
Taisin high-precision vertical processing center with CNC VMC TXP-1890
-
Taisin Light-adoptive 3D printer SLA550EX
-
Taisin Light-adoptive 3D printer SLA880
-
Taisin Metal 3D printer ISLM350DN
Taisin Light-adoptive 3D printer SLA300
Stereolithography (SLA) is a high-speed and high-precision 3D printing technology. Details are printed using a UV laser and a liquid photopolymer, cured by UV radiation-“photopolymer”. The laser beam is controlled to scan the surface of the liquid resin, so that the surface of the liquid resin hardens, forming the scanned film of the cross section of the part. After curing one layer, cover the newly formed layer with another layer of liquid resin and continue scanning to harden and combine it with the cross section of the previously rejected part. This happens forward and backward, a layer by a layer to print a full three -dimensional part.
Description
marker
Introduction of the product
Stereolithography (SLA) is a high-speed and high-precision 3D printing technology. Details are printed using a UV laser and a liquid photopolymer, cured by UV radiation-“photopolymer”. The laser beam is controlled to scan the surface of the liquid resin, so that the surface of the liquid resin hardens, forming the scanned film of the cross section of the part. After curing one layer, cover the newly formed layer with another layer of liquid resin and continue scanning to harden and combine it with the cross section of the previously rejected part. This happens forward and backward, a layer by a layer to print a full three -dimensional part.
Details about the product
Molded parts with the highest detail and the quality of the smooth surface
Accuracy up to 0.05 mm for the manufacture of precision prototypes.
Details can be made in a matter of minutes or hours, depending on the size and complexity of the part.
The possibility of manufacturing various parts and compound nodes.
Smolish materials differ in strength, detail, color, transparency and heat resistance.
ISLA300 specification
| Category | Specification |
| Laser system | Lazer type: solid -state laser with diode pump (nd: yvo₄) Wave length: 354.7 nm Lazer power: 1000/2000/3000 MW |
| Re -coating system | Coating method: intellectual positional-vacuum-adsorption coating. Normal layer thickness: 0.1 mm. The thickness of the fast production layer: 0.1-0.15 mm. The thickness of the layer of precision production: 0.05–0.1 mm. |
| Optical scan system | The diameter of the spot (@1/e²): 0.10-0.50 mm Scanning galvanometer: high -speed scanning galvanometer Part scan speed: 6.0 m/s (recommended) Part jump speed: 10.0 m/s (recommended) |
| The reference speed of production | 30 ~ 80g/h |
| Lifting system | Repeated positioning accuracy: ± 0.01 mm. Lifting engine: high -precision cervical. Reference platform: marble reference platform. |
| Resin tank | Standard volume: about 42 liters at 200 mm (Z) Production platform XY: 300 mm (x) × 300 mm (Y) Axis Z: 200 mm (standard) / 300 mm (by individual order) Maximum weight: 30 kg at 200 mm (Z) Smol heating method: heated with hot air |
| Photosensitive resin | ZR680 (saturated white), ZR710 (strong white), ZR820 (high transparency), Realabs (persistent yellow), redwood (red yoma) |
| Management software | Network type: Ethernet, TCP/IP, IEEE802.3 Management software: ISLA (Zero 5.0) Production software Data processing software: 3DLAYER Data interface: CLI file, SLC file, STL file |
Contact us
Related popular products
Taisin Metal 3D printer SLM160
Selective laser melting of metals (SLM) is a 3D printing technology in which metal powder is used for direct printing of metal parts. When printing, the scraper applies a layer of metal powder to the supporting plate of the molding cylinder, and the laser beam selectively melts the powder in accordance with the transverse section profile of each layer of the part for processing the current layer. After the sintering of one layer is completed, the lifting system reduces the height of one layer of cross section. The video for the distribution of the powder distributes another layer of metal powder into the formed layer of cross section and sins the next layer. This is the layer by the layer. Until the whole part is in a way. The entire molding process is carried out in a technological chamber, vacuumed or filled with protective gas to prevent metal reaction with other gases at high temperatures.
Taisin Metal 3D printer SLM280
Selective laser melting of metals (SLM) is a 3D printing technology in which metal powder is used for direct printing of metal parts. When printing, the scraper applies a layer of metal powder to the supporting plate of the molding cylinder, and the laser beam selectively melts the powder in accordance with the transverse section profile of each layer of the part for processing the current layer. After the sintering of one layer is completed, the lifting system reduces the height of one layer of cross section. The video for the distribution of the powder distributes another layer of metal powder into the formed layer of cross section and sins the next layer. This is the layer by the layer. Until the whole part is in a way. The entire molding process is carried out in a technological chamber, vacuumed or filled with protective gas to prevent metal reaction with other gases at high temperatures.
Taisin Light-adoptive 3D printer SLA500
Stereolithography (SLA) is a high-speed and high-precision 3D printing technology. Details are printed using a UV laser and a liquid photopolymer, cured by UV radiation-“photopolymer”. The laser beam is controlled to scan the surface of the liquid resin, so that the surface of the liquid resin hardens, forming the scanned film of the cross section of the part. After curing one layer, cover the newly formed layer with another layer of liquid resin and continue scanning to harden and combine it with the cross section of the previously rejected part. This happens forward and backward, a layer by a layer to print a full three -dimensional part.
Taisin high-precision vertical processing center with CNC VMC TXP-1890
The machines of a series of vertical processing centers are based on quick and rigid processing as a basic starting point of design, ensuring mass production, processing accuracy and the efficiency of parts processing. The modular combination of functions of highly effective unloading, fast feed and high -speed spindle can satisfy the individual choice of various needs of customers in processing; All key components affecting the quality of the entire machine are imported high -quality components;
Taisin Light-adopted 3D printer ISL1100
Stereolithography (SLA) is a high-speed and high-precision 3D printing technology. Details are printed using a UV laser and a liquid photopolymer, cured by UV radiation-“photopolymer”. The laser beam is controlled to scan the surface of the liquid resin, so that the surface of the liquid resin hardens, forming the scanned film of the cross section of the part. After curing one layer, cover the newly formed layer with another layer of liquid resin and continue scanning to harden and combine it with the cross section of the previously rejected part. This happens forward and backward, a layer by a layer to print a full three -dimensional part.
Taisin horizontal processing center YBM-1270
The horizontal processing center is a high -performance and high -precision CNC machine with a horizontal spindle arrangement, suitable for processing complex parts and serial production. The machine is equipped with a multi -axial connection function and an automatic tool for changing the tool, which allows the processing of several surfaces and complex curved surfaces in one clamp, reducing the amount of clamp time and processing errors. Horizontal processing centers are usually used to efficiently process heavy blanks and have a good performance of chips removal. They are suitable for aerospace, automotive industry, mechanical engineering, large forms and other areas. Due to the high rigidity, excellent processing stability and the effective processing opportunities, it is widely used in industries, where high performance and accuracy are required.
Taisin high-speed and high-precision processing center for processing parts TX-V8
A high -speed and high -precision processing center for parts is a CNC processing equipment, which combines the functions of milling, drilling, carving, boring and others. It is specially designed for high -precision and high -speed production. Its nucleus has a high stiffness design and a high -speed spindle equipped with precision linear guides and ball screws to ensure stability and accuracy during processing. The processing center is equipped with a rapid shift system and an effective design of chips removal, which significantly increases the processing efficiency and the level of automation of production. It is widely used in the aerospace industry, automobile details, precision tools, the production of press forms and other areas and is suitable for processing complex forms and high-precision parts with high demand.
Taisin portal processing center YBM-2015
The portal processing center is a large -sized high -performance CNC processing equipment specially designed for precision processing of large and complex blanks. Its design uses a portal frame, which has high stiffness and stability, provides a multi -axial connection, has a wide processing range and is suitable for cutting various complex contours. The equipment is equipped with a powerful spindle and a high -precision guide system, which meet the requirements of high -speed and high -precision processing. Portal processing centers are widely used in aerospace, shipbuilding, energy, heavy engineering, the production of press forms and other industries. They are especially suitable for processing large parts, complex curved surfaces and high -precision shapes.
Taisin Light-adopted 3D printer SLA6036
Stereolithography (SLA) is a high-speed and high-precision 3D printing technology. Details are printed using a UV laser and a liquid photopolymer, cured by UV radiation-“photopolymer”. The laser beam is controlled to scan the surface of the liquid resin, so that the surface of the liquid resin hardens, forming the scanned film of the cross section of the part. After curing one layer, cover the newly formed layer with another layer of liquid resin and continue scanning to harden and combine it with the cross section of the previously rejected part. This happens forward and backward, a layer by a layer to print a full three -dimensional part.
Taisin Metal 3D printer ISLM500D
Selective laser melting of metals (SLM) is a 3D printing technology in which metal powder is used for direct printing of metal parts. When printing, the scraper applies a layer of metal powder to the supporting plate of the molding cylinder, and the laser beam selectively melts the powder in accordance with the transverse section profile of each layer of the part for processing the current layer. After the sintering of one layer is completed, the lifting system reduces the height of one layer of cross section. The video for the distribution of the powder distributes another layer of metal powder into the formed layer of cross section and sins the next layer. This is the layer by the layer. Until the whole part is in a way. The entire molding process is carried out in a technological chamber, vacuumed or filled with protective gas to prevent metal reaction with other gases at high temperatures.
Taisin Metal 3D printer ISLM600QN
Selective laser melting of metals (SLM) is a 3D printing technology in which metal powder is used for direct printing of metal parts. When printing, the scraper applies a layer of metal powder to the supporting plate of the forming cylinder, and the laser beam selectively melts the powder in accordance with the transverse section of each layer of the part for processing the current layer. After the sintering of one layer is completed, the lifting system reduces the height of one layer of cross section. The video for the distribution of the powder distributes another layer of metal powder into the formed layer of cross section and sins the next layer. This is the layer by the layer. Until the whole part is in a way. The entire molding process is carried out in a technological chamber, vacuumed or filled with protective gas to prevent metal reaction with other gases at high temperatures.
Taisin Light-adoptive 3D printer SLA550
Stereolithography (SLA) is a high-speed and high-precision 3D printing technology. Details are printed using a UV laser and a liquid photopolymer, cured by UV radiation-“photopolymer”. The laser beam is controlled to scan the surface of the liquid resin, so that the surface of the liquid resin hardens, forming the scanned film of the cross section of the part. After curing one layer, cover the newly formed layer with another layer of liquid resin and continue scanning to harden and combine it with the cross section of the previously rejected part. This happens forward and backward, a layer by a layer to print a full three -dimensional part.
Taisin Light-adoptive 3D printer SLA800
Stereolithography (SLA) is a high-speed and high-precision 3D printing technology. Details are printed using a UV laser and a liquid photopolymer, cured by UV radiation-“photopolymer”. The laser beam is controlled to scan the surface of the liquid resin, so that the surface of the liquid resin hardens, forming the scanned film of the cross section of the part. After curing one layer, cover the newly formed layer with another layer of liquid resin and continue scanning to harden and combine it with the cross section of the previously rejected part. This happens forward and backward, a layer by a layer to print a full three -dimensional part.
Taisin Metal 3D printer ISLM800QN
Selective laser melting of metals (SLM) is a 3D printing technology in which metal powder is used for direct printing of metal parts. When printing, the scraper applies a layer of metal powder to the supporting plate of the forming cylinder, and the laser beam selectively melts the powder in accordance with the transverse section of each layer of the part for processing the current layer. After the sintering of one layer is completed, the lifting system reduces the height of one layer of cross section. The video for the distribution of the powder distributes another layer of metal powder into the formed layer of cross section and sins the next layer. This is the layer by the layer. Until the whole part is in a way. The entire molding process is carried out in a technological chamber, vacuumed or filled with protective gas to prevent metal reaction with other gases at high temperatures.
Taisin three-wire rail molding machine of high stiffness TX-6027
A three-line reforming machine of high stiffness is a high-performance machine specially designed for processing press forms and has excellent rigidity and stability. This model uses a three -line design of the guide, which significantly increases the vibration resistance and carrying capacity of the machine, providing stable and accurate cutting performance during high -precision processing. Especially suitable for processing large, complex shapes and materials of high hardness. Due to the excellent accuracy and stability of processing, it is widely used in the production of press forms in cars, household appliances, plastics, pressure under pressure and other industries. It can effectively reduce processing time and increase production efficiency and product quality.
Taisin Light-adoptive 3D printer SLA200
Stereolithography (SLA) is a high-speed and high-precision 3D printing technology. Details are printed using a UV laser and a liquid photopolymer, cured by UV radiation-“photopolymer”. The laser beam is controlled to scan the surface of the liquid resin, so that the surface of the liquid resin hardens, forming the scanned film of the cross section of the part. After curing one layer, cover the newly formed layer with another layer of liquid resin and continue scanning to harden and combine it with the cross section of the previously rejected part. This happens forward and backward, a layer by a layer to print a full three -dimensional part.
Please leave us a message
- Russian
- English
- French
- German
- Portuguese
- Spanish
- Japanese
- Korean
- Arabic
- Turkish
- Italian
- Indonesian
- Swedish
- Belarusian
- Bengali
- Telugu
- Ukrainian
- Uzbek
- Vietnamese