Products
-
Taisin Light-adopted 3D printer ISL1100
-
Taisin Metal 3D printer SLM280
-
Taisin Light-adopted 3D printer SLA660
-
Taisin Light-adoptive 3D printer SLA500
-
Taisin three-wire rail molding machine of high stiffness TX-6027
-
Taisin Metal 3D printer ISLM350D
-
Taisin Gravity-milling machine EMC-650
-
Taisin Metal 3D printer ISLM500D
-
Taisin horizontal processing center with CNC High accuracy HMC TXHD-630
-
Taisin Light-adopted 3D printer SLA660Lite
-
Taisin high-precision vertical processing center with CNC VMC TXP-1890
-
Taisin Light-adoptive 3D printer SLA800
-
Taisin Light-adoptive 3D printer SLA300
-
Taisin Light-adopted 3D printer SLA6036
-
Taisin high-speed five-axis processing center TX-UC400
-
Taisin Metal 3D printer ISLM800QN
Taisin Light-adoptive 3D printer SLA450
Stereolithography (SLA) is a high-speed and high-precision 3D printing technology. Details are printed using a UV laser and a liquid photopolymer, cured by UV radiation-“photopolymer”. The laser beam is controlled to scan the surface of the liquid resin, so that the surface of the liquid resin hardens, forming the scanned film of the cross section of the part. After curing one layer, cover the newly formed layer with another layer of liquid resin and continue scanning to harden and combine it with the cross section of the previously rejected part. This happens forward and backward, a layer by a layer to print a full three -dimensional part.
Description
marker
Introduction of the product
Stereolithography (SLA) is a high-speed and high-precision 3D printing technology. Details are printed using a UV laser and a liquid photopolymer, cured by UV radiation-“photopolymer”. The laser beam is controlled to scan the surface of the liquid resin, so that the surface of the liquid resin hardens, forming the scanned film of the cross section of the part. After curing one layer, cover the newly formed layer with another layer of liquid resin and continue scanning to harden and combine it with the cross section of the previously rejected part. This happens forward and backward, a layer by a layer to print a full three -dimensional part.
Details about the product
Molded parts with the highest detail and the quality of the smooth surface
Accuracy up to 0.05 mm for the manufacture of precision prototypes.
Details can be made in a matter of minutes or hours, depending on the size and complexity of the part.
The possibility of manufacturing various parts and compound nodes.
Smolish materials differ in strength, detail, color, transparency and heat resistance.
Characteristics ISLA450
| Laser system | |
| Lazer type | Solid -state laser with diode pumping nd: yvo₄ |
| Wavelength | 354.7 nm |
| Laser power | 1000/2000/3000 MW |
| Re -coating system | |
| Distribution method | Intellectual positioning is a vacular adsorption coating |
| Normal layer thickness | 0.1 mm |
| Quick creation of layer thickness | 0.1 ~ 0.15 mm |
| Precision thickness of the production layer | 0.05 ~ 0.1 mm |
| Optical scan system | |
| Spot (diameter@1/e²) | 0.10 ~ 0.50 mm |
| Scanning galvanometer | High -speed scanning galvanometer |
| Part scan speed | 6.0 m/s (recommended) |
| Partial jump speed | 10.0 m/s (recommended) |
| The reference speed of production | 30 ~ 100 g/h |
| Lifting system | |
| Repeat the accuracy of positioning | ± 0.01 mm |
| Lifting engine | High -precision cervical |
| Test platform | Marble reference platform |
| Resin tank | |
| Standard volume | About 98 liters at 300 mm (Z) |
| Production platform XY | 450 mm (x) × 450 mm (y) |
| Axis z | 300 mm (standard) 350 mm/400 mm (by individual order) |
| The maximum weight of the part | 50 kg at 300 mm (Z) |
| The method of heating resins | Heating with hot air |
| Photosensitive resin | |
| ZR680 | Beautiful white |
| ZR710 | Hard white |
| ZR820 | High transparency |
| Real ABS | Hard yellow |
| Red Wood | Daimukhong |
| Management software | |
| Type of network | Ethernet, TCP/IP, IEEE802.3 |
| Management software | ISLA software (Zero 5.0) for production |
| Data processing software | 3d layer |
| Data interface | CLI files, SLC files, STL files |
| Installation conditions | |
| Power supply | 200 ~ 240 in alternating current, 50/60 Hz, single -phase, 5/10 a |
| Environmental temperature | 20-26 ° C. |
| Relative humidity | Less than 40%, without hoarfrost |
| The size of the equipment | 1.45 m (w) × 1.05 m (d) × 1.85 m (c) |
| Equipment weight | About 820 kg |
| Warranty period | |
| Laser | 5000 hours or 12 months (depending on what will come earlier) |
| The whole car | 12 months from the date of installation |
Contact us
Related popular products
Taisin Metal 3D printer SLM160
Selective laser melting of metals (SLM) is a 3D printing technology in which metal powder is used for direct printing of metal parts. When printing, the scraper applies a layer of metal powder to the supporting plate of the molding cylinder, and the laser beam selectively melts the powder in accordance with the transverse section profile of each layer of the part for processing the current layer. After the sintering of one layer is completed, the lifting system reduces the height of one layer of cross section. The video for the distribution of the powder distributes another layer of metal powder into the formed layer of cross section and sins the next layer. This is the layer by the layer. Until the whole part is in a way. The entire molding process is carried out in a technological chamber, vacuumed or filled with protective gas to prevent metal reaction with other gases at high temperatures.
Taisin Light-adoptive 3D printer SLA200
Stereolithography (SLA) is a high-speed and high-precision 3D printing technology. Details are printed using a UV laser and a liquid photopolymer, cured by UV radiation-“photopolymer”. The laser beam is controlled to scan the surface of the liquid resin, so that the surface of the liquid resin hardens, forming the scanned film of the cross section of the part. After curing one layer, cover the newly formed layer with another layer of liquid resin and continue scanning to harden and combine it with the cross section of the previously rejected part. This happens forward and backward, a layer by a layer to print a full three -dimensional part.
Taisin Light-adopted 3D printer SLA1300D
Stereolithography (SLA) is a high-speed and high-precision 3D printing technology. Details are printed using a UV laser and a liquid photopolymer, cured by UV radiation-“photopolymer”. The laser beam is controlled to scan the surface of the liquid resin, so that the surface of the liquid resin hardens, forming the scanned film of the cross section of the part. After curing one layer, cover the newly formed layer with another layer of liquid resin and continue scanning to harden and combine it with the cross section of the previously rejected part. This happens forward and backward, a layer by a layer to print a full three -dimensional part.
Taisin high-speed and high-precision processing center for processing parts TX-V8
A high -speed and high -precision processing center for parts is a CNC processing equipment, which combines the functions of milling, drilling, carving, boring and others. It is specially designed for high -precision and high -speed production. Its nucleus has a high stiffness design and a high -speed spindle equipped with precision linear guides and ball screws to ensure stability and accuracy during processing. The processing center is equipped with a rapid shift system and an effective design of chips removal, which significantly increases the processing efficiency and the level of automation of production. It is widely used in the aerospace industry, automobile details, precision tools, the production of press forms and other areas and is suitable for processing complex forms and high-precision parts with high demand.
Taisin Pyatioseva CNC processing center for machining TXMT-21042
A five -axis machine is a modern CNC processing equipment with five independently moving axes that can be accurately controlled in directions X, Y, Z, A and B to achieve effective and high -precision processing of complex parts. The machine adds two rotation axes (usually axis A and axis B), which allows the tool to approach the workpiece at any angle, which significantly increases the flexibility and efficiency of processing. The main advantages of five -axle machines: high efficiency, high accuracy, an increased service life, suitable for complex parts.
Taisin Metal 3D printer ISLM500D
Selective laser melting of metals (SLM) is a 3D printing technology in which metal powder is used for direct printing of metal parts. When printing, the scraper applies a layer of metal powder to the supporting plate of the molding cylinder, and the laser beam selectively melts the powder in accordance with the transverse section profile of each layer of the part for processing the current layer. After the sintering of one layer is completed, the lifting system reduces the height of one layer of cross section. The video for the distribution of the powder distributes another layer of metal powder into the formed layer of cross section and sins the next layer. This is the layer by the layer. Until the whole part is in a way. The entire molding process is carried out in a technological chamber, vacuumed or filled with protective gas to prevent metal reaction with other gases at high temperatures.
Taisin Light-adoptive 3D printer SLA1900D
Stereolithography (SLA) is a high-speed and high-precision 3D printing technology. Details are printed using a UV laser and a liquid photopolymer, cured by UV radiation-“photopolymer”. The laser beam is controlled to scan the surface of the liquid resin, so that the surface of the liquid resin hardens, forming the scanned film of the cross section of the part. After curing one layer, cover the newly formed layer with another layer of liquid resin and continue scanning to harden and combine it with the cross section of the previously rejected part. This happens forward and backward, a layer by a layer to print a full three -dimensional part.
Taisin Light-adoptive 3D printer SLA500
Stereolithography (SLA) is a high-speed and high-precision 3D printing technology. Details are printed using a UV laser and a liquid photopolymer, cured by UV radiation-“photopolymer”. The laser beam is controlled to scan the surface of the liquid resin, so that the surface of the liquid resin hardens, forming the scanned film of the cross section of the part. After curing one layer, cover the newly formed layer with another layer of liquid resin and continue scanning to harden and combine it with the cross section of the previously rejected part. This happens forward and backward, a layer by a layer to print a full three -dimensional part.
Taisin Light-adoptive 3D printer SLA550
Stereolithography (SLA) is a high-speed and high-precision 3D printing technology. Details are printed using a UV laser and a liquid photopolymer, cured by UV radiation-“photopolymer”. The laser beam is controlled to scan the surface of the liquid resin, so that the surface of the liquid resin hardens, forming the scanned film of the cross section of the part. After curing one layer, cover the newly formed layer with another layer of liquid resin and continue scanning to harden and combine it with the cross section of the previously rejected part. This happens forward and backward, a layer by a layer to print a full three -dimensional part.
Taisin Light-adoptive 3D printer SLA300
Stereolithography (SLA) is a high-speed and high-precision 3D printing technology. Details are printed using a UV laser and a liquid photopolymer, cured by UV radiation-“photopolymer”. The laser beam is controlled to scan the surface of the liquid resin, so that the surface of the liquid resin hardens, forming the scanned film of the cross section of the part. After curing one layer, cover the newly formed layer with another layer of liquid resin and continue scanning to harden and combine it with the cross section of the previously rejected part. This happens forward and backward, a layer by a layer to print a full three -dimensional part.
Taisin Metal 3D printer ISLM350DN
Selective laser melting of metals (SLM) is a 3D printing technology in which metal powder is used for direct printing of metal parts. When printing, the scraper applies a layer of metal powder to the supporting plate of the molding cylinder, and the laser beam selectively melts the powder in accordance with the transverse section profile of each layer of the part for processing the current layer. After the sintering of one layer is completed, the lifting system reduces the height of one layer of cross section. The video for the distribution of the powder distributes another layer of metal powder into the formed layer of cross section and sins the next layer. This is the layer by the layer. Until the whole part is in a way. The entire molding process is carried out in a technological chamber, vacuumed or filled with protective gas to prevent metal reaction with other gases at high temperatures.
Taisin Light-adopted 3D printer SLA660
Stereolithography (SLA) is a high-speed and high-precision 3D printing technology. Details are printed using a UV laser and a liquid photopolymer, cured by UV radiation-“photopolymer”. The laser beam is controlled to scan the surface of the liquid resin, so that the surface of the liquid resin hardens, forming the scanned film of the cross section of the part. After curing one layer, cover the newly formed layer with another layer of liquid resin and continue scanning to harden and combine it with the cross section of the previously rejected part. This happens forward and backward, a layer by a layer to print a full three -dimensional part.
Taisin Metal 3D printer ISLM350D
Selective laser melting of metals (SLM) is a 3D printing technology in which metal powder is used for direct printing of metal parts. When printing, the scraper applies a layer of metal powder to the supporting plate of the molding cylinder, and the laser beam selectively melts the powder in accordance with the transverse section profile of each layer of the part for processing the current layer. After the sintering of one layer is completed, the lifting system reduces the height of one layer of cross section. The video for the distribution of the powder distributes another layer of metal powder into the formed layer of cross section and sins the next layer. This is the layer by the layer. Until the whole part is in a way. The entire molding process is carried out in a technological chamber, vacuumed or filled with protective gas to prevent metal reaction with other gases at high temperatures.
Taisin Light-adopted 3D printer SLA6036
Stereolithography (SLA) is a high-speed and high-precision 3D printing technology. Details are printed using a UV laser and a liquid photopolymer, cured by UV radiation-“photopolymer”. The laser beam is controlled to scan the surface of the liquid resin, so that the surface of the liquid resin hardens, forming the scanned film of the cross section of the part. After curing one layer, cover the newly formed layer with another layer of liquid resin and continue scanning to harden and combine it with the cross section of the previously rejected part. This happens forward and backward, a layer by a layer to print a full three -dimensional part.
Taisin Metal 3D printer IDEN160
Selective laser melting of metals (SLM) is a 3D printing technology in which metal powder is used for direct printing of metal parts. When printing, the scraper applies a layer of metal powder to the supporting plate of the molding cylinder, and the laser beam selectively melts the powder in accordance with the transverse section profile of each layer of the part for processing the current layer. After the sintering of one layer is completed, the lifting system reduces the height of one layer of cross section. The video for the distribution of the powder distributes another layer of metal powder into the formed layer of cross section and sins the next layer. This is the layer by the layer. Until the whole part is in a way. The entire molding process is carried out in a technological chamber, vacuumed or filled with protective gas to prevent metal reaction with other gases at high temperatures.
Taisin Metal 3D printer ISLM420DN
Selective laser melting of metals (SLM) is a 3D printing technology in which metal powder is used for direct printing of metal parts. When printing, the scraper applies a layer of metal powder to the supporting plate of the molding cylinder, and the laser beam selectively melts the powder in accordance with the transverse section profile of each layer of the part for processing the current layer. After the sintering of one layer is completed, the lifting system reduces the height of one layer of cross section. The video for the distribution of the powder distributes another layer of metal powder into the formed layer of cross section and sins the next layer. This is the layer by the layer. Until the whole part is in a way. The entire molding process is carried out in a technological chamber, vacuumed or filled with protective gas to prevent metal reaction with other gases at high temperatures.
Please leave us a message
- Russian
- English
- French
- German
- Portuguese
- Spanish
- Japanese
- Korean
- Arabic
- Turkish
- Italian
- Indonesian
- Swedish
- Belarusian
- Bengali
- Telugu
- Ukrainian
- Uzbek
- Vietnamese