Products
-
Taisin Metal 3D printer ISLM420DN
-
Taisin horizontal processing center with CNC High accuracy HMC TXHD-630
-
Taisin Light-adoptive 3D printer SLA550Lite
-
Taisin three-wire rail molding machine of high stiffness TX-6027
-
Taisin Light-adopted 3D printer SLA660
-
Taisin Metal 3D printer IDEN160
-
Taisin Light-adopted 3D printer SLA6036
-
Taisin Metal 3D printer SLM280
-
Taisin high-speed five-axis processing center TX-UC400
-
Taisin Metal 3D printer ISLM800QN
-
Taisin Light-adopted 3D printer ISL1100
-
Taisin Light-adoptive 3D printer SLA800
-
Taisin Light-adoptive 3D printer SLA200
-
Taisin Light-adopted 3D printer SLA660Lite
-
Taisin portal processing center with CNC TXM-9038
-
Taisin high-speed and high-precision processing center for processing parts TX-V8
Taisin Light-adoptive 3D printer SLA550
Stereolithography (SLA) is a high-speed and high-precision 3D printing technology. Details are printed using a UV laser and a liquid photopolymer, cured by UV radiation-“photopolymer”. The laser beam is controlled to scan the surface of the liquid resin, so that the surface of the liquid resin hardens, forming the scanned film of the cross section of the part. After curing one layer, cover the newly formed layer with another layer of liquid resin and continue scanning to harden and combine it with the cross section of the previously rejected part. This happens forward and backward, a layer by a layer to print a full three -dimensional part.
Description
marker
Introduction of the product
Stereolithography (SLA) is a high-speed and high-precision 3D printing technology. Details are printed using a UV laser and a liquid photopolymer, cured by UV radiation-“photopolymer”. The laser beam is controlled to scan the surface of the liquid resin, so that the surface of the liquid resin hardens, forming the scanned film of the cross section of the part. After curing one layer, cover the newly formed layer with another layer of liquid resin and continue scanning to harden and combine it with the cross section of the previously rejected part. This happens forward and backward, a layer by a layer to print a full three -dimensional part.
Details about the product
Molded parts with the highest detail and the quality of the smooth surface
Accuracy up to 0.05 mm for the manufacture of precision prototypes.
Details can be made in a matter of minutes or hours, depending on the size and complexity of the part.
The possibility of manufacturing various parts and compound nodes.
Smolish materials differ in strength, detail, color, transparency and heat resistance.
Technical characteristics ISLA550
| Laser system | |
| Lazer type | Solid -state laser with diode pumping nd: yvo₄ |
| Wavelength | 354.7 nm |
| Laser power | 1000/2000/3000 MW |
| Re -coating system | |
| Distribution method | Intellectual positioning is a vacular adsorption coating |
| Normal layer thickness | 0.1 mm |
| Quick creation of layer thickness | 0.1 ~ 0.15 mm |
| Precision thickness of the production layer | 0.05 ~ 0.1 mm |
| Optical scan system | |
| Spot (diameter@1/e²) | 0.10 ~ 0.50 mm |
| Scanning galvanometer | High -speed scanning galvanometer |
| Part scan speed | 6.0 m/s (recommended) |
| Partial jump speed | 10.0 m/s (recommended) |
| The reference speed of production | 50 ~ 140 g/h |
| lifting system | |
| Repeat the accuracy of positioning | ± 0.01 mm |
| Lifting engine | High -precision cervical |
| Test platform | Marble reference platform |
| Resin tank | |
| Standard volume | About 115 liters at 300 mm (Z) |
| Production platform XY | 500 mm (x) × 500 mm (y) |
| Axis z | 300 mm (standard) 350 mm/400 mm (by individual order) |
| The maximum weight of the part | 60 kg at 300 mm (Z) |
| The method of heating resins | Heating with hot air |
| Photosensitive resin | |
| ZR680 | Beautiful white |
| ZR710 | Hard white |
| ZR820 | High transparency |
| Real ABS | Hard yellow |
| Red Wood | Daimukhong |
| Management software | |
| Type of network | Ethernet, TCP/IP, IEEE802.3 |
| Management software | ISLA software (Zero 5.0) for production |
| Data processing software | 3d layer |
| Data interface | CLI files, SLC files, STL files |
| Installation conditions | |
| Power supply | 200 ~ 240 in alternating current, 50/60 Hz, single -phase, 5/10 a |
| Environmental temperature | 20-26 ° C. |
| Relative humidity | Less than 40%, without hoarfrost |
| The size of the equipment | 1.45 m (w) × 1.05 m (d) × 1.85 m (c) |
| Equipment weight | About 820 kg |
| Warranty period | |
| Laser | 5000 hours or 12 months (depending on what will come earlier) |
| The whole car | 12 months from the date of installation |
Contact us
Related popular products
Taisin Light-adoptive 3D printer SLA800
Stereolithography (SLA) is a high-speed and high-precision 3D printing technology. Details are printed using a UV laser and a liquid photopolymer, cured by UV radiation-“photopolymer”. The laser beam is controlled to scan the surface of the liquid resin, so that the surface of the liquid resin hardens, forming the scanned film of the cross section of the part. After curing one layer, cover the newly formed layer with another layer of liquid resin and continue scanning to harden and combine it with the cross section of the previously rejected part. This happens forward and backward, a layer by a layer to print a full three -dimensional part.
Taisin Metal 3D printer ISLM350D
Selective laser melting of metals (SLM) is a 3D printing technology in which metal powder is used for direct printing of metal parts. When printing, the scraper applies a layer of metal powder to the supporting plate of the molding cylinder, and the laser beam selectively melts the powder in accordance with the transverse section profile of each layer of the part for processing the current layer. After the sintering of one layer is completed, the lifting system reduces the height of one layer of cross section. The video for the distribution of the powder distributes another layer of metal powder into the formed layer of cross section and sins the next layer. This is the layer by the layer. Until the whole part is in a way. The entire molding process is carried out in a technological chamber, vacuumed or filled with protective gas to prevent metal reaction with other gases at high temperatures.
Taisin high-precision vertical processing center with CNC VMC TXP-1890
The machines of a series of vertical processing centers are based on quick and rigid processing as a basic starting point of design, ensuring mass production, processing accuracy and the efficiency of parts processing. The modular combination of functions of highly effective unloading, fast feed and high -speed spindle can satisfy the individual choice of various needs of customers in processing; All key components affecting the quality of the entire machine are imported high -quality components;
Taisin Light-adoptive 3D printer SLA200
Stereolithography (SLA) is a high-speed and high-precision 3D printing technology. Details are printed using a UV laser and a liquid photopolymer, cured by UV radiation-“photopolymer”. The laser beam is controlled to scan the surface of the liquid resin, so that the surface of the liquid resin hardens, forming the scanned film of the cross section of the part. After curing one layer, cover the newly formed layer with another layer of liquid resin and continue scanning to harden and combine it with the cross section of the previously rejected part. This happens forward and backward, a layer by a layer to print a full three -dimensional part.
Taisin Light-adoptive 3D printer SLA550Lite
Stereolithography (SLA) is a high-speed and high-precision 3D printing technology. Details are printed using a UV laser and a liquid photopolymer, cured by UV radiation-“photopolymer”. The laser beam is controlled to scan the surface of the liquid resin, so that the surface of the liquid resin hardens, forming the scanned film of the cross section of the part. After curing one layer, cover the newly formed layer with another layer of liquid resin and continue scanning to harden and combine it with the cross section of the previously rejected part. This happens forward and backward, a layer by a layer to print a full three -dimensional part.
Taisin Metal 3D printer ISLM350DN
Selective laser melting of metals (SLM) is a 3D printing technology in which metal powder is used for direct printing of metal parts. When printing, the scraper applies a layer of metal powder to the supporting plate of the molding cylinder, and the laser beam selectively melts the powder in accordance with the transverse section profile of each layer of the part for processing the current layer. After the sintering of one layer is completed, the lifting system reduces the height of one layer of cross section. The video for the distribution of the powder distributes another layer of metal powder into the formed layer of cross section and sins the next layer. This is the layer by the layer. Until the whole part is in a way. The entire molding process is carried out in a technological chamber, vacuumed or filled with protective gas to prevent metal reaction with other gases at high temperatures.
Taisin portal processing center YBM-2015
The portal processing center is a large -sized high -performance CNC processing equipment specially designed for precision processing of large and complex blanks. Its design uses a portal frame, which has high stiffness and stability, provides a multi -axial connection, has a wide processing range and is suitable for cutting various complex contours. The equipment is equipped with a powerful spindle and a high -precision guide system, which meet the requirements of high -speed and high -precision processing. Portal processing centers are widely used in aerospace, shipbuilding, energy, heavy engineering, the production of press forms and other industries. They are especially suitable for processing large parts, complex curved surfaces and high -precision shapes.
Taisin Metal 3D printer ISLM420DN
Selective laser melting of metals (SLM) is a 3D printing technology in which metal powder is used for direct printing of metal parts. When printing, the scraper applies a layer of metal powder to the supporting plate of the molding cylinder, and the laser beam selectively melts the powder in accordance with the transverse section profile of each layer of the part for processing the current layer. After the sintering of one layer is completed, the lifting system reduces the height of one layer of cross section. The video for the distribution of the powder distributes another layer of metal powder into the formed layer of cross section and sins the next layer. This is the layer by the layer. Until the whole part is in a way. The entire molding process is carried out in a technological chamber, vacuumed or filled with protective gas to prevent metal reaction with other gases at high temperatures.
Taisin horizontal processing center with CNC High accuracy HMC TXHD-630
Horizontal processing centers with CNC and automatic Pallet change devices are developed taking into account efficiency and reliability. HMC is also more durable and has a large tool for storing tools. This design increases repeatability and general versatility. If you are simply looking for a more reliable solution than a vertical processing center, there are also horizontal processing centers without a pallet change device.
Taisin drilling and threaded-cutting machine with CNC TXT-700
The centers for drilling and cutting threads are designed to be simple and effective, ideally suitable for accurate, quick and repeated processing processes. A special design for drilling and cutting threads provides maximum efficiency and cutting speed of thread, and also allows you to drill more solid materials. Drilling-rhinated CNC machines are ideal for processing parts with several holes, deep holes or threaded holes.
Taisin portal processing center with CNC TXM-9038
A two -column vertical processing adapts to the characteristics of traditional two -column machines with high rigidity, a symmetrical structure and high stability. Through the analysis of elements, the structure of the main components is optimized, the dynamic characteristics of the product are improved and the perfect combination of high power, high torque, high efficiency and high -precision processing is achieved. It is suitable for large -scale sectors of heavy processing, such as shipbuilding, metallurgy and petrochemistry.
Taisin Light-adoptive 3D printer SLA550EX
Stereolithography (SLA) is a high-speed and high-precision 3D printing technology. Details are printed using a UV laser and a liquid photopolymer, cured by UV radiation-“photopolymer”. The laser beam is controlled to scan the surface of the liquid resin, so that the surface of the liquid resin hardens, forming the scanned film of the cross section of the part. After curing one layer, cover the newly formed layer with another layer of liquid resin and continue scanning to harden and combine it with the cross section of the previously rejected part. This happens forward and backward, a layer by a layer to print a full three -dimensional part.
Taisin Metal 3D printer ISLM800QN
Selective laser melting of metals (SLM) is a 3D printing technology in which metal powder is used for direct printing of metal parts. When printing, the scraper applies a layer of metal powder to the supporting plate of the forming cylinder, and the laser beam selectively melts the powder in accordance with the transverse section of each layer of the part for processing the current layer. After the sintering of one layer is completed, the lifting system reduces the height of one layer of cross section. The video for the distribution of the powder distributes another layer of metal powder into the formed layer of cross section and sins the next layer. This is the layer by the layer. Until the whole part is in a way. The entire molding process is carried out in a technological chamber, vacuumed or filled with protective gas to prevent metal reaction with other gases at high temperatures.
Taisin Metal 3D printer ISLM500D
Selective laser melting of metals (SLM) is a 3D printing technology in which metal powder is used for direct printing of metal parts. When printing, the scraper applies a layer of metal powder to the supporting plate of the molding cylinder, and the laser beam selectively melts the powder in accordance with the transverse section profile of each layer of the part for processing the current layer. After the sintering of one layer is completed, the lifting system reduces the height of one layer of cross section. The video for the distribution of the powder distributes another layer of metal powder into the formed layer of cross section and sins the next layer. This is the layer by the layer. Until the whole part is in a way. The entire molding process is carried out in a technological chamber, vacuumed or filled with protective gas to prevent metal reaction with other gases at high temperatures.
Taisin Light-adoptive 3D printer SLA450
Stereolithography (SLA) is a high-speed and high-precision 3D printing technology. Details are printed using a UV laser and a liquid photopolymer, cured by UV radiation-“photopolymer”. The laser beam is controlled to scan the surface of the liquid resin, so that the surface of the liquid resin hardens, forming the scanned film of the cross section of the part. After curing one layer, cover the newly formed layer with another layer of liquid resin and continue scanning to harden and combine it with the cross section of the previously rejected part. This happens forward and backward, a layer by a layer to print a full three -dimensional part.
Taisin processing center for drilling and cutting threads TXT-800
A series of processing centers for drilling and cutting threads is widely used for rapid drilling, cutting threads and milling small parts, such as electronics, plumbing, cars, parts and medical equipment; They are also suitable for small forms and precision processing of copper;
Please leave us a message
- Russian
- English
- French
- German
- Portuguese
- Spanish
- Japanese
- Korean
- Arabic
- Turkish
- Italian
- Indonesian
- Swedish
- Belarusian
- Bengali
- Telugu
- Ukrainian
- Uzbek
- Vietnamese